Lines Matching full:be
17 By default, if this property is not specified, MCLK will be
25 FIFO. This value needs to be in FIFO words (NOT BYTES). This
26 value needs to be in the following interval: (0, DEFAULT_FIFO_DEPTH],
27 otherwise a BUILD_ASSERT() failure will be raised.
32 FIFO. This value needs to be in FIFO words (NOT BYTES). This
33 value needs to be in the following interval: (0, DEFAULT_FIFO_DEPTH],
34 otherwise a BUILD_ASSERT() failure will be raised.
40 Use this property to set the FIFO depth that will be reported
42 should be in the following interval: (0, DEFAULT_FIFO_DEPTH],
43 otherwise a BUILD_ASSERT() failure will be raised.
47 DEFAULT_FIFO_DEPTH cannot be used. Generally, reporting a false
48 FIFO depth should be avoided. Please note that the sanity check
51 use this property, in which case the reported value will be
60 index will be considered 0.
71 If this property is not specified, the transmitter will be set to ASYNC.
72 If one side is SYNC then the other MUST be ASYNC. Failing to meet this
84 If this property is not specified, the receiver will be set to ASYNC.
85 If one side is SYNC then the other MUST be ASYNC. Failing to meet this
98 then the index of the transmission data line will be 0.
110 then the index of the receive data line will be 0.