Lines Matching full:clock

5   An external clock signal driven by a PWM pin.
7   The devicetree must define a clock node:
11       compatible = "pwm-clock";
12       #clock-cells = <1>;
16   This will create a device node with a clock-controller
18   clock signals at 1MHz. Note that the PWM_HZ() macro converts the
20   errors if the clock frequency is not an integer number of nanoseconds.
21   The clock frequency can be explicitly set using the clock-frequency
28 compatible: "pwm-clock"
30 include: [clock-controller.yaml, base.yaml]
37   clock-frequency:
48       clock has started after returning from clock_control_on().
50   "#clock-cells":
53 clock-cells: