Lines Matching +full:reg +full:- +full:names

4  * SPDX-License-Identifier: Apache-2.0
8 #include <arm/armv7-r.dtsi>
9 #include <zephyr/dt-bindings/interrupt-controller/arm-gic.h>
10 #include <zephyr/dt-bindings/ethernet/xlnx_gem.h>
15 reg = <0xff180000 0xc80>;
16 compatible = "xlnx,pinctrl-zynqmp";
19 compatible = "soc-nv-flash";
20 reg = <0xc0000000 DT_SIZE_M(32)>;
24 compatible = "mmio-sram";
25 reg = <0 DT_SIZE_M(64)>;
29 compatible = "zephyr,memory-region", "xlnx,zynq-ocm";
30 reg = <0xfffc0000 DT_SIZE_K(256)>;
31 zephyr,memory-region = "OCM";
36 reg = <0xff000000 0x4c>;
40 interrupt-names = "irq_0";
45 reg = <0xff010000 0x4c>;
49 interrupt-names = "irq_0";
61 interrupt-names = "irq_0", "irq_1", "irq_2";
62 reg = <0xff110000 0x1000>;
74 interrupt-names = "irq_0", "irq_1", "irq_2";
75 reg = <0xff120000 0x1000>;
87 interrupt-names = "irq_0", "irq_1", "irq_2";
88 reg = <0xff130000 0x1000>;
100 interrupt-names = "irq_0", "irq_1", "irq_2";
101 reg = <0xff140000 0x1000>;
106 reg = <0xff0b0000 0x1000>,
113 interrupt-names = "irq_0", "irq_1";
114 mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
115 phy-poll-interval = <1000>;
116 link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
117 amba-ahb-dbus-width = <XLNX_GEM_AMBA_AHB_DBUS_WIDTH_32BIT>;
118 amba-ahb-burst-length = <XLNX_GEM_AMBA_AHB_BURST_SINGLE>;
119 hw-rx-buffer-size = <XLNX_GEM_HW_RX_BUFFER_SIZE_8KB>;
120 hw-rx-buffer-offset = <0>;
121 hw-tx-buffer-size-full;
122 rx-buffer-descriptors = <32>;
123 tx-buffer-descriptors = <32>;
124 rx-buffer-size = <512>;
125 tx-buffer-size = <512>;
126 discard-rx-fcs;
127 unicast-hash;
128 full-duplex;
133 reg = <0xff0c0000 0x1000>,
140 interrupt-names = "irq_0", "irq_1";
141 mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
142 phy-poll-interval = <1000>;
143 link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
144 amba-ahb-dbus-width = <XLNX_GEM_AMBA_AHB_DBUS_WIDTH_32BIT>;
145 amba-ahb-burst-length = <XLNX_GEM_AMBA_AHB_BURST_SINGLE>;
146 hw-rx-buffer-size = <XLNX_GEM_HW_RX_BUFFER_SIZE_8KB>;
147 hw-rx-buffer-offset = <0>;
148 hw-tx-buffer-size-full;
149 rx-buffer-descriptors = <32>;
150 tx-buffer-descriptors = <32>;
151 rx-buffer-size = <512>;
152 tx-buffer-size = <512>;
153 discard-rx-fcs;
154 unicast-hash;
155 full-duplex;
160 reg = <0xff0d0000 0x1000>,
167 interrupt-names = "irq_0", "irq_1";
168 mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
169 phy-poll-interval = <1000>;
170 link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
171 amba-ahb-dbus-width = <XLNX_GEM_AMBA_AHB_DBUS_WIDTH_32BIT>;
172 amba-ahb-burst-length = <XLNX_GEM_AMBA_AHB_BURST_SINGLE>;
173 hw-rx-buffer-size = <XLNX_GEM_HW_RX_BUFFER_SIZE_8KB>;
174 hw-rx-buffer-offset = <0>;
175 hw-tx-buffer-size-full;
176 rx-buffer-descriptors = <32>;
177 tx-buffer-descriptors = <32>;
178 rx-buffer-size = <512>;
179 tx-buffer-size = <512>;
180 discard-rx-fcs;
181 unicast-hash;
182 full-duplex;
187 reg = <0xff0e0000 0x1000>,
194 interrupt-names = "irq_0", "irq_1";
195 mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
196 phy-poll-interval = <1000>;
197 link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
198 amba-ahb-dbus-width = <XLNX_GEM_AMBA_AHB_DBUS_WIDTH_32BIT>;
199 amba-ahb-burst-length = <XLNX_GEM_AMBA_AHB_BURST_SINGLE>;
200 hw-rx-buffer-size = <XLNX_GEM_HW_RX_BUFFER_SIZE_8KB>;
201 hw-rx-buffer-offset = <0>;
202 hw-tx-buffer-size-full;
203 rx-buffer-descriptors = <32>;
204 tx-buffer-descriptors = <32>;
205 rx-buffer-size = <512>;
206 tx-buffer-size = <512>;
207 discard-rx-fcs;
208 unicast-hash;
209 full-duplex;
213 compatible = "xlnx,ps-gpio";
215 reg = <0xff0a0000 0x1000>;
218 interrupt-names = "irq_0";
220 #address-cells = <1>;
221 #size-cells = <0>;
224 compatible = "xlnx,ps-gpio-bank";
225 reg = <0x0>;
226 gpio-controller;
227 #gpio-cells = <2>;
233 compatible = "xlnx,ps-gpio-bank";
234 reg = <0x1>;
235 gpio-controller;
236 #gpio-cells = <2>;
242 compatible = "xlnx,ps-gpio-bank";
243 reg = <0x2>;
244 gpio-controller;
245 #gpio-cells = <2>;
251 compatible = "xlnx,ps-gpio-bank";
252 reg = <0x3>;
253 gpio-controller;
254 #gpio-cells = <2>;
260 compatible = "xlnx,ps-gpio-bank";
261 reg = <0x4>;
262 gpio-controller;
263 #gpio-cells = <2>;
269 compatible = "xlnx,ps-gpio-bank";
270 reg = <0x5>;
271 gpio-controller;
272 #gpio-cells = <2>;