Lines Matching +full:scan +full:- +full:limit
1 # Nordic Wi-Fi driver for nRF70 series SoCs
5 # SPDX-License-Identifier: Apache-2.0
21 Nordic Wi-Fi Driver
49 bool "nRF70 scan only mode"
51 Select this option to enable scan only mode of the nRF70 driver
114 bool "Wi-Fi interface auto start on boot"
135 bool "Low power mode in nRF Wi-Fi chipsets"
160 module-dep = LOG
161 module-str = Log level for Wi-Fi nRF70 driver
162 module-help = Sets log level for Wi-Fi nRF70 driver
172 # Wi-Fi and SR Coexistence Hardware configuration.
174 bool "Wi-Fi and SR coexistence support"
178 depends on $(dt_node_has_prop,nrf70, srrf-switch-gpios)
182 …If this GPIO is asserted (1), the SR side RF switch is connected to the Wi-Fi side (shared antenna…
183 …If this GPIO is de-asserted (0), the SR side RF switch is connected to the SR side (separate anten…
211 The values are in dB scale in steps of 1 dB and range of 0-4 dB.
215 int "PCB loss for 5 GHz band (5150 MHz - 5350 MHz, Channel-32 - Channel-68)"
220 The values are in dB scale in steps of 1 dB and range of 0-4 dB.
224 int "PCB loss for 5 GHz band (5470 MHz - 5730 MHz, Channel-96 - Channel-144)"
229 The values are in dB scale in steps of 1 dB and range of 0-4 dB.
233 int "PCB loss for 5 GHz band (5730 MHz - 5895 MHz, Channel-149 - Channel-177)"
238 The values are in dB scale in steps of 1 dB and range of 0-4 dB.
247 int "Antenna gain for 5 GHz band (5150 MHz - 5350 MHz)"
252 int "Antenna gain for 5 GHz band (5470 MHz - 5730 MHz)"
257 int "Antenna gain for 5 GHz band (5730 MHz - 5895 MHz)"
292 int "HT/VHT Transmit power backoff (in dB) for lower edge of UNII-1 frequency band"
297 int "HE Transmit power backoff (in dB) for lower edge of UNII-1 frequency band"
302 int "HT/VHT Transmit power backoff (in dB) for upper edge of UNII-1 frequency band"
307 int "HE Transmit power backoff (in dB) for upper edge of UNII-1 frequency band"
312 int "HT/VHT Transmit power backoff (in dB) for lower edge of UNII-2A frequency band"
317 int "HE Transmit power backoff (in dB) for lower edge of UNII-2A frequency band"
322 int "HT/VHT Transmit power backoff (in dB) for upper edge of UNII-2A frequency band"
327 int "HE Transmit power backoff (in dB) for upper edge of UNII-2A frequency band"
332 int "HT/VHT Transmit power backoff (in dB) for lower edge of UNII-2C frequency band"
337 int "HE Transmit power backoff (in dB) for lower edge of UNII-2C frequency band"
342 int "HT/VHT Transmit power backoff (in dB) for upper edge of UNII-2C frequency band"
347 int "HE Transmit power backoff (in dB) for upper edge of UNII-2C frequency band"
352 int "HT/VHT Transmit power backoff (in dB) for lower edge of UNII-3 frequency band"
357 int "HE Transmit power backoff (in dB) for lower edge of UNII-3 frequency band"
362 int "HT/VHT Transmit power backoff (in dB) for upper edge of UNII-3 frequency band"
367 int "HE Transmit power backoff (in dB) for upper edge of UNII-3 frequency band"
372 int "HT/VHT Transmit power backoff (in dB) for lower edge of UNII-4 frequency band"
377 int "HE Transmit power backoff (in dB) for lower edge of UNII-4 frequency band"
382 int "HT/VHT Transmit power backoff (in dB) for upper edge of UNII-4 frequency band"
387 int "HE Transmit power backoff (in dB) for upper edge of UNII-4 frequency band"
426 default -15
481 string "Wi-Fi Fixed MAC address in format XX:XX:XX:XX:XX:XX"
486 prompt "Wi-Fi MAC address type"
490 Select the type of MAC address to be used by the Wi-Fi driver
566 # Override the Wi-Fi subsystems WIFI_MGMT_SCAN_SSID_FILT_MAX parameter,
567 # since we support a maximum of 2 SSIDs for scan result filtering.
572 int "Maximum number of scan results to return."
576 Maximum number of scan results to return. 0 represents unlimited number of BSSes.
579 …bool "Wi-Fi beamforming. Enabling beamforming can provide a slight improvement in performance, whe…
583 int "Scan timeout in seconds"
586 menu "nRF Wi-Fi operation band(s)"
604 1 - 2.4GHz
605 2 - 5GHz
606 3 - All ( 2.4GHz and 5GHz )
610 int "MTU for Wi-Fi interface"
616 bool "Suppress networks with non-individual MAC addresses as BSSID in the scan results"
618 Wi-Fi access points use locally administered MAC addresses to manage
619 multiple virtual interfaces. For geo-location use cases, these networks
620 …from the virtual interfaces do not help in any way as they are co-located with the primary interfa…
622 So, to save resources, this option drops such networks from the scan results.
625 bool "Disables DFS channels in scan operation"
627 This option disables inclusion of the DFS channels in the scan operation.
628 This is useful to reduce the scan time, as DFS channels are seldom used.
644 # Relies on power-save mode, so, LPM is needed and AP mode is not supported
654 re-establish the network connection.
683 Minimum time the host should de-assert WAKEUP_NOW and let RPU enter
724 This option controls disable/enable of the WMM (Wireless Multi-Media) feature.
733 bool "PS-Poll frame-based mechanism to retrieve buffered data from AP"
736 and retrieves the frames one-by-one. This conserves more power but adds latency
740 bool "QoS null frame-based mechanism to retrieve buffered data from AP"
757 bool "Wi-Fi keepalive feature for connection maintenance"
760 Enable the Wi-Fi keepalive feature to keep the connection alive by sending
796 bool "Forced Passive scan"
799 Enable this configuration to force passive scan on all channels.
800 This will override application-specified scan type.
803 # Display scan BSS entries limit
804 # By default, the limit is 250 in scan-only mode and 150 in regular mode.
805 int "Display scan bss limit"
811 Number of BSS entries in scan result.
814 bool "Force disable priority window for scan in the case of coexistence with Short Range radio"
816 Enable this configuration to disable priority window for scan