Lines Matching +full:0 +full:- +full:576
1 # Nordic Wi-Fi driver for nRF70 series SoCs
5 # SPDX-License-Identifier: Apache-2.0
21 Nordic Wi-Fi Driver
124 bool "Wi-Fi interface auto start on boot"
145 bool "Low power mode in nRF Wi-Fi chipsets"
169 module-dep = LOG
170 module-str = Log level for Wi-Fi nRF70 driver
171 module-help = Sets log level for Wi-Fi nRF70 driver
193 # Wi-Fi and SR Coexistence Hardware configuration.
195 bool "Wi-Fi and SR coexistence support"
199 depends on $(dt_node_has_prop,nrf70, srrf-switch-gpios)
203 …If this GPIO is asserted (1), the SR side RF switch is connected to the Wi-Fi side (shared antenna…
204 …If this GPIO is de-asserted (0), the SR side RF switch is connected to the SR side (separate anten…
228 default 0
229 range 0 4
232 The values are in dB scale in steps of 1 dB and range of 0-4 dB.
236 int "PCB loss for 5 GHz band (5150 MHz - 5350 MHz, Channel-32 - Channel-68)"
237 default 0
238 range 0 4
241 The values are in dB scale in steps of 1 dB and range of 0-4 dB.
245 int "PCB loss for 5 GHz band (5470 MHz - 5730 MHz, Channel-96 - Channel-144)"
246 default 0
247 range 0 4
250 The values are in dB scale in steps of 1 dB and range of 0-4 dB.
254 int "PCB loss for 5 GHz band (5730 MHz - 5895 MHz, Channel-149 - Channel-177)"
255 default 0
256 range 0 4
259 The values are in dB scale in steps of 1 dB and range of 0-4 dB.
264 default 0
265 range 0 6
268 int "Antenna gain for 5 GHz band (5150 MHz - 5350 MHz)"
269 default 0
270 range 0 6
273 int "Antenna gain for 5 GHz band (5470 MHz - 5730 MHz)"
274 default 0
275 range 0 6
278 int "Antenna gain for 5 GHz band (5730 MHz - 5895 MHz)"
279 default 0
280 range 0 6
284 default 0
285 range 0 10
289 default 0
290 range 0 10
294 default 0
295 range 0 10
299 default 0
300 range 0 10
304 default 0
305 range 0 10
309 default 0
310 range 0 10
313 int "HT/VHT Transmit power backoff (in dB) for lower edge of UNII-1 frequency band"
314 default 0
315 range 0 10
318 int "HE Transmit power backoff (in dB) for lower edge of UNII-1 frequency band"
319 default 0
320 range 0 10
323 int "HT/VHT Transmit power backoff (in dB) for upper edge of UNII-1 frequency band"
324 default 0
325 range 0 10
328 int "HE Transmit power backoff (in dB) for upper edge of UNII-1 frequency band"
329 default 0
330 range 0 10
333 int "HT/VHT Transmit power backoff (in dB) for lower edge of UNII-2A frequency band"
334 default 0
335 range 0 10
338 int "HE Transmit power backoff (in dB) for lower edge of UNII-2A frequency band"
339 default 0
340 range 0 10
343 int "HT/VHT Transmit power backoff (in dB) for upper edge of UNII-2A frequency band"
344 default 0
345 range 0 10
348 int "HE Transmit power backoff (in dB) for upper edge of UNII-2A frequency band"
349 default 0
350 range 0 10
353 int "HT/VHT Transmit power backoff (in dB) for lower edge of UNII-2C frequency band"
354 default 0
355 range 0 10
358 int "HE Transmit power backoff (in dB) for lower edge of UNII-2C frequency band"
359 default 0
360 range 0 10
363 int "HT/VHT Transmit power backoff (in dB) for upper edge of UNII-2C frequency band"
364 default 0
365 range 0 10
368 int "HE Transmit power backoff (in dB) for upper edge of UNII-2C frequency band"
369 default 0
370 range 0 10
373 int "HT/VHT Transmit power backoff (in dB) for lower edge of UNII-3 frequency band"
374 default 0
375 range 0 10
378 int "HE Transmit power backoff (in dB) for lower edge of UNII-3 frequency band"
379 default 0
380 range 0 10
383 int "HT/VHT Transmit power backoff (in dB) for upper edge of UNII-3 frequency band"
384 default 0
385 range 0 10
388 int "HE Transmit power backoff (in dB) for upper edge of UNII-3 frequency band"
389 default 0
390 range 0 10
393 int "HT/VHT Transmit power backoff (in dB) for lower edge of UNII-4 frequency band"
394 default 0
395 range 0 10
398 int "HE Transmit power backoff (in dB) for lower edge of UNII-4 frequency band"
399 default 0
400 range 0 10
403 int "HT/VHT Transmit power backoff (in dB) for upper edge of UNII-4 frequency band"
404 default 0
405 range 0 10
408 int "HE Transmit power backoff (in dB) for upper edge of UNII-4 frequency band"
409 default 0
410 range 0 10
447 default -15
451 default 0
464 default 0
473 default 0
502 string "Wi-Fi Fixed MAC address in format XX:XX:XX:XX:XX:XX"
507 prompt "Wi-Fi MAC address type"
511 Select the type of MAC address to be used by the Wi-Fi driver
570 # Override the Wi-Fi subsystems WIFI_MGMT_SCAN_SSID_FILT_MAX parameter,
577 default 0
578 range 0 65535
580 Maximum number of scan results to return. 0 represents unlimited number of BSSes.
583 …bool "Wi-Fi beamforming. Enabling beamforming can provide a slight improvement in performance, whe…
590 menu "nRF Wi-Fi operation band(s)"
608 1 - 2.4GHz
609 2 - 5GHz
610 3 - All ( 2.4GHz and 5GHz )
614 int "MTU for Wi-Fi interface"
615 range 576 2304 if NET_IPV4
620 bool "Suppress networks with non-individual MAC addresses as BSSID in the scan results"
622 Wi-Fi access points use locally administered MAC addresses to manage
623 multiple virtual interfaces. For geo-location use cases, these networks
624 …from the virtual interfaces do not help in any way as they are co-located with the primary interfa…
648 # Relies on power-save mode, so, LPM is needed and AP mode is not supported
658 re-establish the network connection.
687 Minimum time the host should de-assert WAKEUP_NOW and let RPU enter
703 int "Maximum number of consecutive RPU recovery retries, 0 to disable"
704 default 0
707 and resetting the system. Set it to 0 to keep retrying indefinitely.
728 This option controls disable/enable of the WMM (Wireless Multi-Media) feature.
737 bool "PS-Poll frame-based mechanism to retrieve buffered data from AP"
740 and retrieves the frames one-by-one. This conserves more power but adds latency
744 bool "QoS null frame-based mechanism to retrieve buffered data from AP"
761 bool "Wi-Fi keepalive feature for connection maintenance"
764 Enable the Wi-Fi keepalive feature to keep the connection alive by sending
804 This will override application-specified scan type.
808 # By default, the limit is 250 in scan-only mode and 150 in regular mode.