Lines Matching full:handled
302 uint32_t handled = 0; in udc_rpi_isr() local
325 handled |= USB_INTS_BUFF_STATUS_BITS; in udc_rpi_isr()
330 handled |= USB_INTS_SETUP_REQ_BITS; in udc_rpi_isr()
338 handled |= USB_INTS_DEV_CONN_DIS_BITS; in udc_rpi_isr()
360 handled |= USB_INTS_VBUS_DETECT_BITS; in udc_rpi_isr()
376 handled |= USB_INTS_BUS_RESET_BITS; in udc_rpi_isr()
396 handled |= USB_INTS_DEV_SUSPEND_BITS; in udc_rpi_isr()
402 handled |= USB_INTR_DEV_RESUME_FROM_HOST_BITS; in udc_rpi_isr()
410 handled |= USB_INTS_ERROR_DATA_SEQ_BITS; in udc_rpi_isr()
416 handled |= USB_INTS_ERROR_RX_TIMEOUT_BITS; in udc_rpi_isr()
422 handled |= USB_INTS_ERROR_RX_OVERFLOW_BITS; in udc_rpi_isr()
428 handled |= USB_INTS_ERROR_BIT_STUFF_BITS; in udc_rpi_isr()
434 handled |= USB_INTS_ERROR_CRC_BITS; in udc_rpi_isr()
437 if (status ^ handled) { in udc_rpi_isr()
438 LOG_ERR("unhandled IRQ: 0x%x", (uint)(status ^ handled)); in udc_rpi_isr()
518 * If the pull-up is not enabled here, this will be handled by the USB_INTS_VBUS_DETECT in udc_rpi_init()