Lines Matching full:cat
461 * When using some type of short cable (for example, CAT-6 cable with low
462 * attenuation to high frequencies signal vs. CAT-5 cable) or board to board
505 * Ethernet short cables like CAT-5, CAT-5e without any problem.
525 * Solution for Using CAT-5E or CAT-6 Short Cable with a Link Issue for the
529 * Solution for Using CAT-5E or CAT-6 Short Cable with a Link Issue for the
531 * https://microchipsupport.force.com/s/article/Solution-for-Using-CAT-5E-or
532 * -CAT-6-Short-Cable- with-a-Link-Issue-for-the-KSZ8795-Family
538 * short CAT-5E or CAT-6 cable (about <=30 meter). The failure rate may be about
543 * Basically, KSZ8795 10/100 Ethernet switch family was designed based on CAT-5
545 * cables of CAT-5E and CAT-6, both cables have wider bandwidth that has
546 * different frequency characteristics than CAT-5 cable. More higher frequency
547 * component of the CAT-5E or CAT-6 will be amplified in the receiving amplifier
556 * range when using CAT-5E and CAT-6 cable.
569 * solve the link issue if using CAT-5E and CAT-6 short cables.
617 * Due to CAT-5E and CAT-6 cable having wider bandwidth, more high frequency
621 * reduce the high frequency components to meet CAT-5E and CAT-6 short cable
622 * link issue and doesn’t affect CAT-5 cable because CAT-5 is not a wider
646 LOG_INF("apply workarkound 0x02 link issue CAT-5E/6 on KSZ8794");
659 LOG_INF("apply workarkound 0x04 link issue CAT-5E/6 on KSZ8794");