Lines Matching full:cable

348  * Solution for Short Cable Problems with the KSZ8795 Family
351  * Solution for Short Cable Problems with the KSZ8795 Family
353  * https://microchipsupport.force.com/s/article/Solution-for-Short-Cable-
358  *   type of short cable (<3m).
365  * equalizer EQ that can balance the signal received to adapt various cable
368  * When using some type of short cable (for example, CAT-6 cable with low
369  * attenuation to high frequencies signal vs. CAT-5 cable) or board to board
410  * to the different type of short cable’s characteristics. The current default
414  * for all corner cases of the short cable and short distance connection for
432  * Solution for Using CAT-5E or CAT-6 Short Cable with a Link Issue for the
436  * Solution for Using CAT-5E or CAT-6 Short Cable with a Link Issue for the
439  * -CAT-6-Short-Cable- with-a-Link-Issue-for-the-KSZ8795-Family
445  * short CAT-5E or CAT-6 cable (about <=30 meter). The failure rate may be about
451  * cable. With the application of more type of cables, specially two types
453  * different frequency characteristics than CAT-5 cable. More higher frequency
463  *  range when using CAT-5E and CAT-6 cable.
502  * short cable or on-board capacitors AC coupling application.
509  *	     equal to 0x00 for very short cable (For example, 0.1m or less)
524  *  Due to CAT-5E and CAT-6 cable having wider bandwidth, more high frequency
528  *  reduce the high frequency components to meet CAT-5E and CAT-6 short cable
529  *  link issue and doesn’t affect CAT-5 cable because CAT-5 is not a wider
530  *  bandwidth cable.
534  *  cable length. This 0x0f initial equalize value in EQ isn’t needed when
535  *  using very short cable or an on-board direct connection like capacitors AC
536  *  coupling mode. As the cable length increases, the device will equalize
540  *  0x00 for compatibility with all Ethernet cable types and Ethernet cable