32 #define DMA_CTRL_REG_SET_FIELD(_field, _var, _val) \  macro
218 		DMA_CTRL_REG_SET_FIELD(DMA_ON, regs->DMA_CTRL_REG, 0x1);  in dma_smartbond_set_channel_status()
220 		DMA_CTRL_REG_SET_FIELD(DMA_ON, regs->DMA_CTRL_REG, 0x0);  in dma_smartbond_set_channel_status()
331 		DMA_CTRL_REG_SET_FIELD(DREQ_MODE, *dma_ctrl_reg, DREQ_MODE_SW);  in dma_channel_update_dreq_mode()
337 		DMA_CTRL_REG_SET_FIELD(DREQ_MODE, *dma_ctrl_reg, DREQ_MODE_HW);  in dma_channel_update_dreq_mode()
350 		DMA_CTRL_REG_SET_FIELD(AINC, *dma_ctrl_reg, ADDR_ADJ_NO_CHANGE);  in dma_channel_update_src_addr_adj()
353 		DMA_CTRL_REG_SET_FIELD(AINC, *dma_ctrl_reg, ADDR_ADJ_INCR);  in dma_channel_update_src_addr_adj()
366 		DMA_CTRL_REG_SET_FIELD(BINC, *dma_ctrl_reg, ADDR_ADJ_NO_CHANGE);  in dma_channel_update_dst_addr_adj()
369 		DMA_CTRL_REG_SET_FIELD(BINC, *dma_ctrl_reg, ADDR_ADJ_INCR);  in dma_channel_update_dst_addr_adj()
382 		DMA_CTRL_REG_SET_FIELD(BW, *dma_ctrl_reg, BUS_WIDTH_1B);  in dma_channel_update_bus_width()
385 		DMA_CTRL_REG_SET_FIELD(BW, *dma_ctrl_reg, BUS_WIDTH_2B);  in dma_channel_update_bus_width()
388 		DMA_CTRL_REG_SET_FIELD(BW, *dma_ctrl_reg, BUS_WIDTH_4B);  in dma_channel_update_bus_width()
401 		DMA_CTRL_REG_SET_FIELD(BURST_MODE, *dma_ctrl_reg, BURST_MODE_0B);  in dma_channel_update_burst_mode()
404 		DMA_CTRL_REG_SET_FIELD(BURST_MODE, *dma_ctrl_reg, BURST_MODE_4B);  in dma_channel_update_burst_mode()
407 		DMA_CTRL_REG_SET_FIELD(BURST_MODE, *dma_ctrl_reg, BURST_MODE_8B);  in dma_channel_update_burst_mode()
428 			DMA_CTRL_REG_SET_FIELD(REQ_SENSE, *dma_ctrl_reg, REQ_SENSE_EDGE);  in dma_channel_update_req_sense()
432 		DMA_CTRL_REG_SET_FIELD(REQ_SENSE, *dma_ctrl_reg, REQ_SENSE_LEVEL);  in dma_channel_update_req_sense()
537 	DMA_CTRL_REG_SET_FIELD(DMA_PRIO, dma_ctrl_reg, cfg->channel_priority);  in dma_smartbond_config()
583 	DMA_CTRL_REG_SET_FIELD(CIRCULAR, dma_ctrl_reg, cfg->cyclic);  in dma_smartbond_config()
592 		DMA_CTRL_REG_SET_FIELD(DMA_INIT, dma_ctrl_reg, COPY_MODE_INIT);  in dma_smartbond_config()
594 		DMA_CTRL_REG_SET_FIELD(DMA_INIT, dma_ctrl_reg, COPY_MODE_BLOCK);  in dma_smartbond_config()