Lines Matching +full:clock +full:- +full:select

1 # Clock controller driver configuration options
4 # SPDX-License-Identifier: Apache-2.0
11 	  of the clock control driver.
14 	bool "NRF Clock controller support"
17 	select NRFX_CLOCK if !CLOCK_CONTROL_NRF_FORCE_ALT
18 	select ONOFF
20 	  Enable support for the Nordic Semiconductor nRFxx series SoC clock
30 	prompt "32KHz clock source"
37 	select NRFX_CLOCK_LFXO_TWO_STAGE_ENABLED if (!SOC_SERIES_BSIM_NRFXX && \
47 	select NRFX_CLOCK_LFXO_TWO_STAGE_ENABLED if !CLOCK_CONTROL_NRF_FORCE_ALT
52 	select NRFX_CLOCK_LFXO_TWO_STAGE_ENABLED if !CLOCK_CONTROL_NRF_FORCE_ALT
58 	bool "LF clock calibration"
62 	  If calibration is disabled when RC is used for low frequency clock then
63 	  accuracy of the low frequency clock will degrade. Disable on your own
74 	  Enabling indicates that calibration is performed by the clock control driver.
77 	bool "LF clock is always on"
80 	  If RTC is used as system timer then LF clock is always on and handling
88 	  temperature measurement followed by clock calibration. Calibration may
125 	select TEMP_NRF5
126 	select SENSOR
132 	prompt "32KHz clock accuracy"
177 	bool "nRF clock control support"
180 	select ONOFF
181 	select NRFS if HAS_NRFS
183 	  Support for nRF clock control devices.
198 	int "Timeout waiting for nrfs clock service callback in milliseconds"
202 	bool "Clock control for global HSFLL"
217 	  a lower frequency request. The NRF2 clock controller drivers
218 	  expect the clock to be initialized to their lowest frequency, so
220 	  clock controller driver.
223 	  unnecessary HIGH -> LOW -> HIGH cycle given some module will