Lines Matching +full:hci +full:- +full:uart

4 # SPDX-License-Identifier: Apache-2.0
6 comment "Bluetooth HCI Driver Options"
14 	bool "H:4 UART"
19 	  Bluetooth H:4 UART driver. Requires hardware flow control
23 	bool "H:5 UART [EXPERIMENTAL]"
29 	  Bluetooth three-wire (H:5) UART driver. Implementation of HCI
30 	  Three-Wire UART Transport Layer.
40 	  Bluetooth HCI driver for communication with another CPU
48 	  HCI packets are sent and received as single Byte transfers,
64 	  Bluetooth HCI over SPI driver for communication with Bluetooth
73 	  Bluetooth HCI over SPI driver for communication with
77 	bool "ACI message with BlueNRG-based devices"
82 	  Stack. Current driver supports: ST BLUENRG-MS.
102 	  ST STM32WBA HCI Bluetooth interface
105 	bool "STM32WB0 HCI driver"
116 	  ST STM32WB0 HCI Bluetooth interface
147 	  adapter using a User Channel HCI socket to the Linux kernel. It
158 	  Espressif HCI bluetooth interface
171 	bool "DA1453x HCI driver"
176 	  Bluetooth HCI driver for communication with controller
184 	  Bluetooth HCI driver for communication with CMAC core
193 	  NXP HCI bluetooth interface
201 	  Infineon CYW208XX HCI bluetooth interface
213 	  HCI packets are sent and received as single Byte transfers.
216 	int "BT HCI init priority"
220 	  The priority of BT HCI driver initialization.
231 	select UART                          if BT_H4
238 	  Infineon's AIROC™ Wi-Fi & combos portfolio integrates
239 	  IEEE 802.11a/b/g/n/ac/ax Wi-Fi and Bluetooth® 5.2 in a single-chip
240 	  solution to enable small-form-factor IoT designs.
241 source "drivers/bluetooth/hci/Kconfig.esp32"
242 source "drivers/bluetooth/hci/Kconfig.infineon"
243 source "drivers/bluetooth/hci/Kconfig.nxp"
246 	bool "Host auto-initiated Data Length Update quirk"
250 	  Enable the quirk wherein BT Host stack will auto-initiate Data Length
252 	  auto-initiate the procedure if the default data length parameters are
262 	  Pass the controller's public address to the HCI driver in setup()
265 	  public identity through vendor-specific commands. They can then implement the
266 	  setup() HCI driver API function and get the address to set from the public_addr field.
274 	  Enable the HCI vendor-specific Setup function.
277 	  of the vendor-specific commands sequence to initialize the BT Controller
281 	  configuration files. This option are enabled by the vendor-specific
282 	  HCI extension, where the Setup function is implemented.
288 	  Stack size for the HCI driver's TX thread.
298 	  Stack size for the HCI driver's RX thread.
319 …https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4:WIFI-BLUETOO…