Lines Matching refs:will
64 Enabling :kconfig:option:`CONFIG_SHELL_BACKEND_TELNET` will allow users to use telnet
74 This will give the telnet client access to a very limited set of supported commands but
76 option. This will allow the client to be in character mode (character at a time),
77 similar to a UART backend in that regard. This will make the client send a character
79 considerably. For that cost, it will enable the line editing,
146 * Now you should have a network connection to RTT that will let you enter input
169 * Now you should have a network connection to RTT that will let you enter input
399 as one argument. If shell won't find a handler it will display an error message.
408 /* Below code will execute "clear" command on a DUMMY backend */
411 /* Below code will execute "shell colors off" command on
437 :c:macro:`cmd_121_h` :c:macro:`parameter` will execute command
438 :c:macro:`cmd_121_h` and :c:macro:`parameter` will be passed as an argument.
443 :c:macro:`parameter1` :c:macro:`parameter2` will execute command
445 will be passed as an arguments.
450 :c:macro:`cmd_121_h` :c:macro:`parameter2` will execute command
452 :c:macro:`parameter2` will be passed as an arguments.
457 :c:macro:`parameter2` will not execute any command.
547 * :command:`default` - Shell will send terminal width = 80 to the
573 the shell will do one of 3 possible things:
737 thread are enqueued and processed in the shell thread. Logger thread will block
835 line and the :kbd:`Tab` key is pressed, the user will see all root (level 0)
858 the shell will only print the subcommands registered for this command: