Lines Matching refs:suspend

26 devices, the decision to suspend or resume a device can also be
32 to suspend or resume a device.
36   put devices into low-power states (suspend) when they are not in
45   when to suspend or resume devices. For example, a networking
83 management and then suspend devices before changing state. The subsystem takes
108                         power-state-name = "suspend-to-ram";
224             /* suspend the device */
271         uart:~$ pm suspend buttons
289 suspend and resume actions and it's currently active, ``buttons`` supports
298 subsystem can suspend devices, as described in :ref:`pm-device-system-pm`. This
339                     power-state-name = "suspend-to-idle";
353                     power-state-name = "suspend-to-ram";
360                     power-state-name = "suspend-to-ram";
395             *  make only state0 (suspend-to-idle) will be used.