Lines Matching full:certification

19 In this section we give the reader an overview of what the general goal of the safety certification
21 to reach such a safety certification.
40 The general scope of the Safety Committee is to achieve a certification for the `IEC 61508
42 Systematic Capability (SC) 3 for a limited source scope (see certification scope TBD). Since the
111 safety perspective and to be usable for certification purposes. But software quality is not an
161 Also the IEC 61508 standard highly recommends (which is like a must-have for the certification)
202 which are important for certification and the responsible certification body.
253 #. This section describes the certification side. At this point, the code base has to be in an
263 #. This describes the necessary safety process required for certification itself. Here, the final
265    during the certification, and which are prescribed by the certifying authority and the standard
266    being certified. If the certification body approves everything at this stage and the safety
270    circumstances, specifically when something has been identified during the certification process
271    that needs to be quickly adapted on the “auditable” branch in order to obtain certification. In
272    order to prevent this issue from arising again during the next certification, there needs to be
274    them ready for the next certification if necessary.