Lines Matching full:for
23 Options and Option groups required for :ref:`PSE51 <posix_aep_pse51>`,
25 * Bluetooth Host has been extended with support for the Nordic UART Service (NUS), Hands-free Audio
37 for TinyCrypt and provides enhanced security and performance.
41 environment for :ref:`vscode_ide` and :ref:`clion_ide`.
46 While you may refer to release notes from previous 3.x releases for a full change log, other major
49 * Added support for Picolibc as the new default C library.
50 * Added support for the following types of hardware peripherals:
62 * Added support for snippets. Snippets are common configuration settings that can be used across
64 * Added support for Linkable Loadable Extensions (LLEXT).
66 notes for more details):
71 :ref:`pinctrl-guide` for more details.
153 * Deprecated the :c:func:`can_calc_prescaler` API function, as it allows for bitrate
223 * Added ARC MWDT toolchain support for ARC-V targets
224 * Added HW memory barrier API support for multicore targets
232 * Added initial support for Cortex-M85 Core
238 * Add compiler tuning for Cortex-R82
262 using break instruction for unrecoverable exceptions. Enabling the break instruction via
288 :c:macro:`K_THREAD_STACK_LEN` for both single thread stack declaration and array thread
289 stack declarations. This ensures correct alignment for all thread stacks. For user
317 * The CAP Commander and CAP Initiator now no longer require CAS to be discovered for
325 allowing multiple serial endpoints to be used for different purposes.
337 or speakers. The audio data is compressed in a proper format for efficient use of the limited
340 * Reworked the transmission path for data and commands. The "BT TX" thread has been removed, along
341 with the buffer pools for HCI fragments and L2CAP segments. All communication with the
353 :ref:`migration_3.7` for more information.
354 * Added support for Ambiq Apollo3 Blue series.
355 * Added support for NXP RW61x.
356 * Added support for Infineon CYW208XX.
357 * Added support for Renesas SmartBond DA1469x.
359 * Added support for NXP IW612 on boards mimxrt1170_evkb and mimxrt1040_evk.
365 * Added support for these SoC series:
367 * Added support for Ambiq Apollo3 Blue and Apollo3 Blue Plus SoC series.
368 * Added support for Synopsys ARC-V RMX1xx simulation platform.
369 * Added support for STM32H7R/S SoC series.
370 * Added support for NXP mke15z7, mke17z7, mke17z9, MCXNx4x, RW61x
371 * Added support for Analog Devices MAX32 SoC series.
372 * Added support for Infineon Technologies AIROC |trade| CYW20829 Bluetooth LE SoC series.
373 * Added support for MediaTek MT8195 Audio DSPs
374 * Added support for Nuvoton Numaker M2L31X SoC series.
375 * Added support for the Microchip PolarFire ICICLE Kit SMP variant.
376 * Added support for Renesas RA8 series SoC.
381 * ITE: Rename the Kconfig symbol for all ITE SoC variants.
383 * STM32H5: Added support for Stop mode and :kconfig:option:`CONFIG_PM`.
385 * STM32C0: Added support for :kconfig:option:`CONFIG_POWEROFF`.
386 * STM32U5: Added support for Stop3 mode.
389 …* nsim: split nsim platform for arc_classic (ARCv2 and ARCv3 ISA based) and arc_v (RISC-V ISA base…
395 * Nordic nRF54L: Added support for the FLPR (fast lightweight processor) RISC-V CPU.
397 * Espressif: Added Simple boot support for ESP32 SoC variants, which allows loading application
402 * Added support for :c:func:`sys_arch_reboot()`.
406 * Renesas RZ/T2M: Added default values for System Clock Control register.
408 * Added support for these boards:
410 * Added support for :zephyr:board:`Ambiq Apollo3 Blue board <apollo3_evb>`: ``apollo3_evb``.
411 …* Added support for :zephyr:board:`Ambiq Apollo3 Blue Plus board <apollo3p_evb>`: ``apollo3p_evb``.
412 * Added support for :zephyr:board:`Raspberry Pi 5 board <rpi_5>`: ``rpi_5``.
413 * Added support for :zephyr:board:`Seeed Studio XIAO RP2040 board <xiao_rp2040>`: ``xiao_rp2040``.
414 …* Added support for :zephyr:board:`Mikroe RA4M1 Clicker board <mikroe_clicker_ra4m1>`: ``mikroe_cl…
415 * Added support for :ref:`Arduino UNO R4 WiFi board <arduino_uno_r4>`: ``arduino_uno_r4_wifi``.
416 * Added support for :ref:`Renesas EK-RA8M1 board <ek_ra8m1>`: ``ek_ra8m1``.
417 * Added support for :zephyr:board:`ST Nucleo H533RE <nucleo_h533re>`: ``nucleo_h533re``.
418 …* Added support for :zephyr:board:`ST STM32C0116-DK Discovery Kit <stm32c0116_dk>`: ``stm32c0116_d…
419 …* Added support for :zephyr:board:`ST STM32H745I Discovery <stm32h745i_disco>`: ``stm32h745i_disco…
420 * Added support for :zephyr:board:`ST STM32H7S78-DK Discovery <stm32h7s78_dk>`: ``stm32h7s78_dk``.
421 …* Added support for :zephyr:board:`ST STM32L152CDISCOVERY board <stm32l1_disco>`: ``stm32l152c_dis…
422 …* Added support for :zephyr:board:`ST STEVAL STWINBX1 Development kit <steval_stwinbx1>`: ``steval…
423 …* Added support for NXP boards: ``frdm_mcxn947``, ``ke17z512``, ``rd_rw612_bga``, ``frdm_rw612``, …
424 …* Added support for :zephyr:board:`Synopsys ARC-V RMX1xx nSIM-based simulation platform <nsim_arc_…
425 …* Added support for :zephyr:board:`Analog Devices MAX32690EVKIT <max32690evkit>`: ``max32690evkit`…
426 …* Added support for :zephyr:board:`Analog Devices MAX32680EVKIT <max32680evkit>`: ``max32680evkit`…
427 …* Added support for :zephyr:board:`Analog Devices MAX32672EVKIT <max32672evkit>`: ``max32672evkit`…
428 * Added support for :zephyr:board:`Analog Devices MAX32672FTHR <max32672fthr>`: ``max32672fthr``.
429 …* Added support for :zephyr:board:`Analog Devices MAX32670EVKIT <max32670evkit>`: ``max32670evkit`…
430 …* Added support for :zephyr:board:`Analog Devices MAX32655EVKIT <max32655evkit>`: ``max32655evkit`…
431 * Added support for :zephyr:board:`Analog Devices MAX32655FTHR <max32655fthr>`: ``max32655fthr``.
432 …* Added support for :zephyr:board:`Analog Devices AD-APARD32690-SL <apard32690>`: ``ad_apard32690_…
433 …* Added support for :zephyr:board:`Infineon Technologies CYW920829M2EVK-02 <cyw920829m2evk_02>`: `…
434 …* Added support for :zephyr:board:`Nuvoton Numaker M2L31KI board <numaker_m2l31ki>`: ``numaker_m2l…
435 …* Added support for :zephyr:board:`Espressif ESP32-S2 DevKit-C <esp32s2_devkitc>`: ``esp32s2_devki…
436 …* Added support for :zephyr:board:`Espressif ESP32-S3 DevKit-C <esp32s3_devkitc>`: ``esp32s3_devki…
437 …* Added support for :zephyr:board:`Espressif ESP32-C6 DevKit-C <esp32c6_devkitc>`: ``esp32c6_devki…
438 …* Added support for :zephyr:board:`Waveshare ESP32-S3-Touch-LCD-1.28 <esp32s3_touch_lcd_1_28>`: ``…
439 * Added support for :zephyr:board:`M5Stack ATOM Lite <m5stack_atom_lite>`: ``m5stack_atom_lite``.
440 * Added support for :zephyr:board:`CTHINGS.CO Connectivity Card nRF52840 <ctcc>`: ``ctcc``.
445 enabled full cache management, Chrom-ART, double frame buffer and full refresh for
449 * Add HEX file support for Linkserver to all NXP boards
454 * LLVM fuzzing support has been refactored while adding support for it in native_sim.
459 * Added Arduino dts node labels for the nRF5340 Audio DK.
467 * Added support for the following shields:
492 * A ``socs`` folder for applications has been introduced that allows for Kconfig fragments and
501 required C Standard version, with, for example, :kconfig:option:`CONFIG_REQUIRES_STD_C11`.
513 "warning as error" toolchain flags for all images, if set (:github:`70217`).
519 * Added flash support for Intel Hex files for the LinkServer runner.
521 * Added sysbuild ``sysbuild/CMakeLists.txt`` entry point and added support for
522 ``APPLICATION_CONFIG_DIR`` which allows for adjusting how sysbuild functions (:github:`72923`).
534 * Added warning/error message for blobs that are missing (:github:`73051`).
538 * Added support for enabling LTO for whole application (:github:`69519`).
543 * Added support for new aggressive size optimisation flag (for GCC and Clang) using
549 matches for de-duplication (:github:`71381`).
553 * Added support for disabling output disassembly having the source code in using
565 * Added support for voltage biasing:
571 * Implemented for the TI ADC114s08 ADC driver.
579 * Added driver for the ENE KB1200.
580 * Added driver for the NXP GAU ADC.
583 * Added support for ADI's ad5593.
584 * Added I2C bus support for ADI ad559x.
593 * Added support for DMA mode operation for ESP32S3 and ESP32C3.
596 * Added support for nRF54L15 and nRF54H20 in the nrfx_saadc driver.
605 * Added support for regulator output as reference to NXP LPADC.
611 * Added support for power management to the Smartbond SDADC and GPADC drivers.
612 * Fixed support for :kconfig:option:`CONFIG_PM_DEVICE_RUNTIME` in the Smartbond ADC driver.
616 * Added support for STM32H7R/S series.
619 * Added support for Nuvoton m2l31x in the numaker ADC driver.
626 * Added support for Nuvoton Numaker M2L31X series.
635 * Added support for STM32G0 and STM32H5 series.
639 * Extended support for automatic sample point location to also cover :c:func:`can_calc_timing` and
641 * Added optional ``min-bitrate`` devicetree property for CAN transceivers.
643 … :c:macro:`DT_INST_CAN_TRANSCEIVER_MIN_BITRATE` for getting the minimum supported bitrate of a CAN
645 * Added support for specifying the minimum bitrate supported by a CAN controller in the internal
647 * Added :c:func:`can_get_bitrate_min` and :c:func:`can_get_bitrate_max` for retrieving the minimum
648 and maximum supported bitrate for a given CAN controller/CAN transceiver combination, reflecting
656 * Added driver for :dtcompatible:`nordic,nrf-can`.
657 * Added driver support for Numaker M2L31X to the :dtcompatible:`nuvoton,numaker-canfd` driver.
669 * Added support for Microcontroller Clock Output (MCO) on STM32H5 series.
670 * Added support for MSI clock on STM32WL series.
671 * Added driver for Analog Devices MAX32 SoC series.
672 * Added support for Nuvoton Numaker M2L31X series.
674 * In LiteX (:file:`drivers/clock_control/clock_control_litex.c`) added return code checking for
679 * Added support for Ambiq Apollo3 series.
680 * Added support for STM32H7R/S series.
681 * Added driver for LPTMR to NXP MCXN947
683 in bits the LPTMR peripheral uses for its counter.
687 * Added support for NXP RW SOC series DAC (:dtcompatible:`nxp,gau-dac`).
688 * Added support for Analog Devices AD5691 / AD5692 / AD5693 DACs
690 * Added support for Texas Instruments DACx0501 series DACs (:dtcompatible:`ti,dacx0501`).
694 * Support for eMMC devices was added to the STM32 SD driver. This can
699 * Added support for :c:macro:`DISK_IOCTL_CTRL_INIT` and
700 :c:macro:`DISK_IOCTL_CTRL_DEINIT` macros, which allow for initializing
703 * Added SDMMC support for STM32H5 series.
711 :ref:`migration_3.7` for examples of this process.
712 * Added driver for ST7796S display controller (:dtcompatible:`sitronix,st7796s`)
713 * Added support for :c:func:`display_read` API to ILI9XXX display driver,
715 * Added support for :c:func:`display_set_orientation` API to SSD16XXX
717 * Added driver for NT35510 MIPI-DSI display controller
721 * Added support for :c:func:`display_set_pixel_format` API to NXP eLCDIF
723 * Added support for inverting color at runtime to the SSD1306 driver, via
727 * Added support for NXP MCXNx4x
736 * Added support for NXP ``rd_rw612_bga``
740 * Added support for STM32H7R/S series.
744 * Added property for specifying ``address-width`` to :dtcompatible:`zephyr,i2c-target-eeprom`.
762 * Added new eth_nxp_enet_qos driver for the ethernet controller present on NXP MCXN SOCs.
763 * Added support for adin1100 phy.
764 * Added support for the Realtek RTL8211F phy.
771 * Added support for network device power management with nxp_enet driver on Kinetis platforms.
772 * Converted eth_nxp_enet driver to use a dedicated workqueue for RX
776 * Added support for :dtcompatible:`nxp,enet1g`.
777 * Added support to use a fused MAC address for nxp_enet MAC on some platforms.
794 * Added custom driver extension APIs for adin2111 driver.
795 * Enabled support for promiscuous mode in the adin2111 driver.
802 * Added support for PTP on compatible STM32 series (STM32F7, STM32H5 and STM32H7).
804 * Removed legacy STM32Cube HAL API support for STM32 F4, F7, and H7 series.
805 * Added support for RX/TX timestamping to eth_stm32_hal driver.
819 * Added a devicetree property for the enc28j60 to set the RX filter.
821 * Added conditions to enable ptp_clock driver implementation for the native_posix
823 * Fixed DSA driver for KSZ8xxx to correctly initialize LAN devices.
824 * Fixed the wrong register address being used for tail tag enable in ksz8863.
834 * Added support for Ambiq Apollo3 series.
835 * Added support for multiple instances of the SPI NOR driver (spi_nor.c).
836 * Added preliminary support for non-erase devices with introduction of
842 with or without erase requirement, when erase has been used not for preparing
843 a device for a random data write, but rather to remove/scramble data from
847 * Added support for RRAM on nrf54l15 devices.
849 * Added support for STM32 XSPI external NOR flash driver (:dtcompatible:`st,stm32-xspi-nor`).
850 * Added support for XIP on external NOR flash in STM32 OSPI, QSPI and XSPI driver.
854 * Added support for Nuvoton Numaker M2L31X series.
863 * Added support for the u-blox UBX protocol.
864 * Added device driver for the u-blox M8 GNSS modem (:dtcompatible:`u-blox,m8`).
865 * Added device driver for the Luatos Air530z GNSS modem (:dtcompatible:`luatos,air530z`).
869 * Added support for Ambiq Apollo3 series.
873 * Added driver for Analog Devices MAX32 SoC series.
874 * Added support for Nuvoton Numaker M2L31X series.
879 * Added device EUI64 ID support and implementation for STM32WB, STM32WBA and STM32WL series.
883 * Added support for Ambiq Apollo3 series.
884 * In STM32 V2 driver, added support for a new :kconfig:option:`CONFIG_I2C_STM32_V2_TIMING`
891 * Added support for STM32H5 series.
893 * Added driver for Analog Devices MAX32 SoC series.
894 * Added support for Nuvoton Numaker M2L31X series.
897 * Added support for bitrate setting from the devicetree.
903 * Added support for STM32H5 series.
905 * Added support for Nordic nRF54L Series.
910 * Added shell support for querying bus and CCC commands.
931 * Added driver for Lumissil Microsystems (a division of ISSI) IS31FL3194 controller
954 * Added driver for Texas Instruments TLC59731 RGB controller.
958 * Added driver for Reyax LoRa module
962 * Added support for HSEM based STM32 driver.
966 * Made the ``bus_enable`` and ``bus_disable`` functions optional for drivers to
971 * Added support for STM32 MDIO controller driver.
980 * Added option to disable N_VBUSEN for :dtcompatible:`x-powers,axp192`.
981 * Added GPIO input edge events for :dtcompatible:`nordic,npm1300`.
982 * Added long press reset configuration for :dtcompatible:`nordic,npm1300`.
983 * Fixed initialisation of hysteretic mode for :dtcompatible:`nordic,npm6001`.
991 * Removed support for dts compatible ``zephyr,gsm-ppp`` from ``MODEM_CELLULAR`` driver.
997 * Implemented modem pipelinks in ``MODEM_CELLULAR`` driver for additional DLCI channels
999 ``user_pipe_<index>`` and DLCI channels reserved for GNSS tunneling named
1002 * Added new set of shell commands for sending AT commands directly to a modem using the
1015 * Added support for mode selection via the device tree
1019 * Add the new experimental :ref:`MSPI(Multi-bit SPI) <mspi_api>` API, enabling support for
1021 phases as well as variable latency for a transfer. The API now supports from single wire
1031 * Added mspi/api and mspi/flash testcase for developers to check their implementations.
1035 * Added driver for Renesas RA8 series
1036 * Added driver for Infineon PSoC6 (legacy)
1037 * Added driver for Analog Devices MAX32 SoC series.
1038 * Added driver for Ambiq Apollo3
1039 * Added driver for ENE KB1200
1040 * Added driver for NXP RW
1042 * STM32 driver now supports remap functionality for STM32C0
1043 * Added support for Nuvoton Numaker M2L31X series.
1047 * Added support for STM32H7R/S series.
1048 * Added a Add QTMR PWM driver for NXP imxrt11xx
1050 * Fix :zephyr:code-sample:`pwm-blinky` code sample to demonstrate PWM support for
1052 * Added driver for ENE KB1200.
1053 * Added support for Nordic nRF54H and nRF54L Series SoCs.
1054 * Added support for Nuvoton Numaker M2L31X series.
1063 * Added power management for :dtcompatible:`renesas,smartbond-regulator`.
1065 * Removed use of busy wait for single threaded systems.
1066 * Fixed control of DCDC2 output for :dtcompatible:`x-powers,axp192-regulator`.
1067 * Fixed current and voltage get functions for :dtcompatible:`renesas,smartbond-regulator`.
1074 * Added driver for reset controller on Nuvoton NPCX chips.
1075 * Added reset controller driver for NXP SYSCON.
1076 * Added reset controller driver for NXP RSTCTL.
1077 * Added support for Nuvoton Numaker M2L31X series.
1082 * Added support for :kconfig:option:`CONFIG_RTC_ALARM` on all STM32 MCU series (except STM32F1).
1083 * Added support for Nuvoton Numaker M2L31X series.
1095 * Added SDHC driver for Renesas MMC controller (:dtcompatible:`renesas,rcar-mmc`).
1116 * Added :kconfig:option:`CONFIG_DHT_LOCK_IRQS` for the dht11 driver which allows for locking
1149 * Added support for STM32 Digital Temperature Sensor (:dtcompatible:`st,stm32-digi-temp`).
1154 * Added support for the MPU6500 3-axis accelerometer and 3-axis gyroscope sensor to the
1185 * Added support for STM32H7R/S series.
1187 * Added support for HSCIF (High Speed Serial Communication Interface with FIFO) in the UART
1188 driver for Renesas RCar platforms.
1190 * Added driver for ENE KB1200 UART.
1192 * Added driver for UART on Analog Devices MAX32 series microcontrollers.
1194 * Added driver for UART on Renesas RA8 devices.
1198 * Added support for asynchronous API for the emulated UART driver.
1204 * Added support for ESP32C6 SoC.
1212 * Added support for single wire half-duplex communication.
1218 * Added support for asynchronous API.
1220 * Added support for baud rate of 3MHz.
1234 * Added support for runtime configuration.
1236 * Added support for reset device.
1240 * Added support for hardware flow control.
1242 * Added support for UART on Ambiq Apollo3 SoC.
1246 * Added support for power management.
1254 * Added support for Nuvoton Numaker M2L31X series.
1259 * Added support for Ambiq Apollo3 series general IOM based SPI.
1260 * Added support for Ambiq Apollo3 BLEIF based SPI, which is specific for internal HCI.
1261 …* Added support for :kconfig:option:`CONFIG_PM` and :kconfig:option:`CONFIG_PM_DEVICE_RUNTIME` on …
1262 …* Added support for :kconfig:option:`CONFIG_NOCACHE_MEMORY` in DMA SPI mode for STM32F7x SoC serie…
1263 * Added support for STM32H7R/S series.
1264 * Added driver for Analog Devices MAX32 SoC series.
1269 * Added UDC shim driver for NXP EHCI and IP3511 USB controller.
1275 * Added support for STM32 Digital camera interface (DCMI) driver (:dtcompatible:`st,stm32-dcmi`).
1277 * Added support for the ov7670 camera
1278 * Added support for the ov5640 camera
1279 * Added CSI-2 MIPI driver for NXP MCUX
1280 * Added support for DVP FPC 24-pins mt9m114 camera module shield
1286 * Added support for Ambiq Apollo3 series.
1287 * Added support for STM32H7R/S series.
1288 * Added support for Nuvoton Numaker M2L31X series.
1289 * Added watchdog for external 32kHz crystal in ESP32 SoC variants.
1293 * Fixed message parsing for esp-at.
1295 * Implement :c:func:`bind` and :c:func:`recvfrom` for UDP sockets for esp-at.
1296 * Added option for setting maximum data size for eswifi.
1304 * Added support for gratuitous ARP transmission.
1312 * Increased upper limit for CoAP retransmissions (:kconfig:option:`CONFIG_COAP_MAX_RETRANSMIT`).
1316 * Fixed CoAP ID generation for responses in CoAP Server sample.
1320 * Added support for new net_mgmt events, which allow to track IPv4 and IPv6
1330 * Added support for encapsulated vendor specific options. By enabling
1334 * Added support for the "Vendor class identifier" option. Use the
1356 * Fixed incorrect DHCPv6 events code base for net_mgmt events.
1359 * Added documentation page for DHCPv6.
1367 * Added support for mDNS to provide records in runtime.
1368 * Added support for caching DNS records.
1374 * Added support for IEEE 1588-2019 PTP.
1375 * Added support for SO_TIMESTAMPING socket option to get timestamping information in socket
1382 * Added HTTP/2 server library and sample application with support for static,
1397 * IPv4 netmask is now set individually for each address instead of being set
1398 for the whole interface.
1405 * Implemented reachability hint for IPv6. Upper layers can use
1410 multiple interfaces for multicast forwarding entries.
1413 * Fixed IPv6 hop limit handling for multicast packets.
1451 * Added support for copying user data in network buffers.
1454 * Added receive callback for dummy L2, applicable in certain use cases
1455 (for example, packet capture).
1456 * Implemented pseudo interface, a.k.a "any" interface for packet capture use
1462 * Added support for partial L3 and L4 checksum offloading.
1465 * Added new driver for Native Simulator offloaded sockets.
1467 * Added statistics collection for Virtual network interfaces.
1473 * Added ALPN support for MQTT TLS backend.
1487 * Added unique default name for OpenThread interfaces.
1519 * Added support for tracing socket API calls.
1521 * Fixed the protocol field endianness for ``AF_PACKET`` type sockets.
1522 * Fixed :c:func:`getsockname` for TCP.
1527 * Removed support for asynchronous timeouts in socket services library.
1551 instead of legacy Mbed TLS functions for hash computation.
1569 * Added support for BSSID configuration in connect call.
1573 * Added support for configuring RTS threshold. With this, users can set the RTS threshold
1575 * Added support for configuring AP parameters. With this, users can set AP parameters at
1593 * Added a new ``ZPERF_SESSION_PERIODIC_RESULT`` event for periodic updates
1596 * Improved performance in the default configuration for the zperf sample.
1603 * Added support for HID devices
1612 This is useful for nodes that have multiple compatibles.
1643 picking the same page to evict constantly. The updated login now searches for a new
1677 * Instructions for the deprecated mcumgr go tool have been removed, a list of alternative,
1687 * In FS group, TinyCrypt has been replaced with PSA calls for SHA calculation.
1692 syslog server for the networking backend is set by the DHCPv4 Log Server Option (7).
1696 * Add support for syslog (POSIX).
1698 * Add :c:macro:`LOG_WRN_ONCE` for logging warning message where only the first occurrence is
1701 * Add :c:func:`log_thread_trigger` for triggering processing of the log messages.
1713 * Fix support for :kconfig:option:`CONFIG_LOG_MSG_APPEND_RO_STRING_LOC`.
1718 create and set up pipes for the application to use.
1735 * Added shell support for device power management.
1748 of PSA Crypto for enhanced security and performance.
1760 for the Mbed TLS's p256-m driver PSA crypto library. This is a Cortex-M SW
1772 * Add support for Agilex and Agilex 5.
1784 SDHC device in use did not report support for the maximum frequency
1786 support for a given timing mode but not the highest frequency that
1794 Common Ancestor for executing Exit and Entry Actions.
1799 * FAT FS: It is now possible to expose file system formatting functionality for FAT without also
1810 operation has been previously used for removing/scrambling data rather than
1811 to prepare a device for a random data write.
1817 * Added :kconfig:option:`CONFIG_NVS_DATA_CRC`, to add CRC protection for data.
1822 size than available, because space for reserved ate was not subtracted.
1831 * Added shell (mainly for testing purposes during development).
1837 * Added support for the following Option Groups
1846 * Added support for the following Options
1875 * Improved the VDED process by optimizing the channel reference copying for the clones delivered
1936 * Fixed img verify for hex file format in imgtool
1944 * Added MCUboot support for ``ESP32-C6``
1948 * Added TLV querying for protected region
1950 * Added using builtin keys for verification in bootutil
1952 * Added builtin ECDSA key support for PSA Crypto backend
1954 * Added ``OVERWRITE_ONLY_KEEP_BACKUP`` option for secondary images
1956 * Added defines for ``SOC_FLASH_0_ID`` and ``SPI_FLASH_0_ID``
1958 * Fixed ASN.1 support for mbedtls version >= 3.1
1968 * Fixed imgtool verify command for edcsa-p384 signed images
1970 * Added support for NXP MCXN947
1987 * Support for MCUboot signature types other than RSA-3072 has been added.
2006 * Improved handling for :samp:`invert-{x,y}` and ``swap-xy`` configurations.
2010 * Added missing Kconfig stubs for DMA2D symbols.
2012 * Integrated support for LVGL rounder callback function.
2017 * Added snippet for easily enabling UART over Bluetooth LE by passing ``-S nus-console`` during