Lines Matching full:fixed
62 * Fixed unstable work of application built with MetaWare toolchain for hardware
161 * LPC55xxx: Fixed the system hardware clock cycle rate.
198 * Fixed partition naming on ``lpcxpresso55s69`` to use the standard slot
256 * Fixed an issue whereby board revision ``0`` did not include overlay files for that revision.
271 * Fixed an issue whereby shields were processed in order of the root they resided in rather than
274 * Fixed an issue whereby using some shields with sysbuild would cause a cmake Kconfig error.
276 * Fixed an issue where the macros ``_POSIX_C_SOURCE`` and ``_XOPEN_SOURCE`` would be defined
358 * Added support for top value configuration and fixed a bug in the native posix driver.
393 * Fixed lan865x driver. Transmission speed improvements, IRQ handling fixes.
394 * Fixed s32_gmac driver. Link up/down handling fixes.
395 * Fixed phy_mii driver. The invalid phy id was incorrectly checked.
396 * Fixed sam_gmac driver. PTP clock adjustment was wrong for negative values.
397 * Fixed adin2111 driver. Initialization was done incorrectly when working with adin2110.
398 * Fixed ksz8081 driver. Logging changes, RMII clock fixes, GPIO pin fixes.
476 a fixed number of retries.
480 * Fixed ``mcux_i3c_config_get()`` not returning the configuration to the caller.
513 * Fixed initialization priorities of NXP s32 NETC drivers.
514 * Fixed SAM GMAC transfer timeout errors caused by MDIO clock not being initialized.
515 * Fixed ESP32 MDIO driver being enabled when node was not status okay.
519 * Fixed build errors caused by mdio.h driver header not including errno.h
530 * Fixed MMIO size calculation by disabling IO/memory decoding beforehand.
556 * Fixed ESP32S3 low frequency PWM issue.
572 * Fixed init priority for :dtcompatible:`x-powers,axp192-regulator`.
573 * Fixed LDO GPIO control for :dtcompatible:`nordic,npm1300-regulator`.
597 * Fixed arithmetic overflow in the LTRF216A driver.
598 * Fixed negative temperature calculation in MAX31865 driver.
609 * Fixed Bosch BMI160 gyro range calculation and added support for getting
614 * Fixed ST drivers Kconfig dependency to the HAL_ST module.
619 * Fixed LSM6DSV16x gyro range table.
620 * Fixed missing return value checks in ADLTC2990, TSL2540, MAX17055 drivers.
622 * Fixed interrupt in BMI323 driver.
626 * Fixed self test delay in ADXL367 accelerometer sensor driver.
696 * Fixed esp32 driver. Decreased minimum heap size, disabled automatic reconnection on leaving.
697 …* Fixed esp_at driver. Allow building without IPv4 support. Passive Receive mode fixes. Depend on …
698 * Fixed winc1500 driver. Disconnect result event was not returned when disconnecting.
711 * Fixed NULL pointer dereference in :c:func:`coap_packet_remove_option`.
746 * Fixed TTL/hop limit set on DNS packets.
759 * Fixed double converted byte order of BMCA info.
766 * Fixed an error being emitted when unhandled ICMP message was received.
767 * Fixed a bug where ICMP Echo Reply could be sent without proper source IP
769 * Fixed a packet leak in ICMP Echo Request handlers in case priority check
777 * Fixed L3/L4 checksum calculation/validation for IP-fragmented packets on
779 * Fixed net_context not being set on IP fragmented packets, preventing send
795 * Fixed composite read/write access rights check.
797 * Fixed a bug in block-wise transfer where block-wise ACKs were sent with
799 * Fixed object version reporting for LwM2M version 1.1.
806 * Fixed pmin observer attribute handling in tickless mode.
829 * Fixed netmask not being registered for loopback address.
836 * Fixed a possible packet leak at the ARP level, in case of errors during ARP
839 * Fixed network interface being brought up even when underlying device is not
850 * Fixed handling of incoming Register messages when wildcard subscription is used.
864 * Fixed ``otPlatAssertFail()`` so that it prints the location of the actual
869 * Fixed PPP connection termination when interface goes down.
875 * Fixed unexpected timeout message when executing loopback ping.
880 * Fixed ``tcp connect`` command operation (TCP context released prematurely).
882 * Fixed unnecessary connection close in telnet shell backend in case of
884 * Fixed double packet dereference in ping reply handler.
885 * Fixed possible deadlock when executing ``net arp`` command.
896 * Fixed :c:func:`select` not setting ``writefds`` in case of errors.
908 * Fixed POLLERR error reporting in TLS sockets.
909 * Fixed DTLS handshake processing during :c:func:`poll`.
916 * Fixed DTLS connection timeout when monitoring socket with :c:func:`poll`.
917 * Fixed NULL link layer address pointer dereference on packet socket, in case
925 * Fixed remote address passed in :c:func:`accept` call.
926 * Fixed reference counting during active handshake to prevent TCP context
928 * Fixed compilation with :kconfig:option:`CONFIG_NET_TCP_CONGESTION_AVOIDANCE`
931 * Fixed possible race condition between TCP workqueue and other threads when
933 * Fixed possible race condition between input thread and TCP workqueue.
935 * Fixed a bug where TCP state machine could get stuck in LAST_ACK state
937 * Fixed a bug where TCP state machine could get stuck in FIN_WAIT_1 state
943 * Fixed potential buffer overflow when copying TFTP error message.
952 * Fixed Wi-Fi shell. SSID print fixes. Help text fixes. Channel validation fixes.
953 * Fixed TWT functionality. Teardown status was not updated. Powersave fixes.
959 * Fixed TCP packet counting when transmitting.
961 * Fixed zperf session leak on interrupted downloads.
962 * Fixed the calculation ratio between Mbps, Kbps and bps.
991 * Fixed an issue in MCUmgr image management whereby erasing an already erased slot would return
994 * Fixed MCUmgr UDP transport structs being statically initialised. This results in about a
997 * Fixed an issue in MCUmgr which would cause a user data buffer overflow if the UDP transport was
1003 * Fixed an issue in MCUmgr console UART input whereby the FIFO would be read outside of an ISR,
1006 * Fixed an issue whereby the ``mcuboot erase`` DFU shell command could be used to erase the
1009 * Fixed an issue whereby messages that were too large to be sent over the UDP transport would
1012 * Fixed an issue where confirming an image in Direct XIP mode would always confirm the image in
1020 * Fixed an issue in MCUmgr FS management whereby the semaphore lock would not be given if an
1026 * Fixed an issue in MCUmgr image management whereby an error would be returned if a command was
1049 * Fixed userspace issue for :c:func:`printk` when :kconfig:option:`CONFIG_LOG_PRINTK` is enabled.
1140 * Fixed issue whereby :kconfig:option:`CONFIG_RETENTION_BUFFER_SIZE` values over 256 would cause
1163 * Fixed Coverity-CID 211585, 334906, 334909, and 340851.
1195 * Fixed documentation for :c:func:`zbus_chan_add` and :c:func:`zbus_chan_rm` adding the timeout
1198 * Fixed warning when mixing C and C++ files using zbus. (:github:`65222`)
1202 * Fixed parameter order of net buf pool fixed definition. (:github:`65039`)
1227 * Fixed compatible sector checking in bootutil.
1229 * Fixed Kconfig issue with saving encrypted TLVs not depending on encryption being enabled.
1231 * Fixed issue with missing condition check for applications in sysflash include file.
1233 * Fixed issue with single slot encrypted image listing support in boot_serial.
1235 * Fixed issue with allowing MBEDTLS Kconfig selection when tinycrypt is used.
1237 * Fixed missing response if echo command was disabled in boot_serial.
1239 * Fixed issue with USB configurations not generating usable images.
1296 * Fixed issue with the Zephyr log levels not mapping properly to LVGL log levels.
1298 * Fixed issue where setting :kconfig:option:`CONFIG_LV_Z_FULL_REFRESH` did not
1318 * Fixed an issue in :zephyr:code-sample:`smp-svr` sample whereby if USB was already initialised,