Lines Matching full:added
14 * Barrier API: added architecture agnostic API for data memory barriers.
20 * Added Power Delivery Source Support to the USB-C Stack.
21 * Bluetooth: Added support for Periodic Advertising with Responses (PAwR).
23 * Added an API for real-time clocks (RTC).
24 * Added Retention subsystem.
25 * Added initial support for MMU on Xtensa.
33 * Added Snippets: Support common configuration settings that can be used across
195 * Added a new flag :c:struct:`dac_channel_cfg` ``buffered`` for DAC channels in
297 * Added :c:macro:`CAN_FRAME_ESI` CAN-FD Error State Indicator flag.
311 * Added MPUv8 support
313 * Improved ARCv2 HS4x processors handling - added proper Kconfig options, provided default mcpu
316 * added rollback to check METAWARE_ROOT if ARCMWDT_TOOLCHAIN_PATH missing
339 * Added support for generating zImage headers
349 * Added ISBs after SCTLR Modifications
357 * Added :c:macro:`Z_SPIN_DELAY` to allow to conditionally compile a k_busy_wait() for this arch
362 * Added :kconfig:option:`CONFIG_PMP_NO_TOR`, :kconfig:option:`CONFIG_PMP_NO_NA4`, and
366 * Added support for setting PMP granularity with :kconfig:option:`CONFIG_PMP_GRANULARITY`.
379 * Added initial support for MMU on Xtensa.
382 * Added C structs to represent interrupt frames to help with debugging.
401 * Added additional validation for MCC and MCS, including opcodes, values, etc.
404 * Added support for creating a broadcast sink from a PA sink.
405 * Added support for optional characteristics in CSIP.
408 * Added support for long reads and writes for multiple profiles.
409 * Added support for long BAP ASE notifications and optimized long notify
412 * Added the CAP initiator cancel procedure.
420 * Added experimental support for SMP keypress notifications.
424 * Added support for the new Periodic Advertising with Responses (PAwR), both
426 * Added support for initiating connections from PAwR, as well as receiving
434 * Added experimental support for Mesh Protocol d1.1r18 specification, gated
467 …* Added experimental support for Mesh Binary Large Object Transfer Model d1.0r04_PRr00 specificati…
468 * Added experimental support for Mesh Device Firmware Update Model d1.0r04_PRr00 specification.
470 * Added experimental support for the PSA crypto APIs.
471 * Added a new work queue to store mesh settings, including a new API for
482 * Added support for coexistence with other transceivers.
483 * Added support for multiple CIS/CIG setup/connect and teardown procedures in
490 * Added support for considering the SDU interval, along with the packet
492 * Added a new ``BT_CTRL_TX_PWR_DBM`` option to set the TX power directly in
502 * Added support for these SoC series:
506 * Added support for STM32U599 SoC variants
513 * Added support for these ARC boards:
518 * Added support for these ARM boards:
547 * Added support for these ARM64 boards:
552 * Added support for these RISC-V boards:
557 * Added support for these X86 boards:
559 * Added support for these Xtensa boards:
565 * Added ARC MWDT toolchain support for qemu_arc_hs
568 * Added DFSS driver support
569 * Added pinctrl support
588 * FVP revc_2xaemv8a / aemv8r: Added ethernet, PHY and MDIO nodes
623 * Added support for these following shields:
653 * Added a new CMake helper function for setting/updating sysbuild CMake cache
670 * Added an option to validate device initialization priorities at build time.
674 * Added a new option to disable tracking of macro expansion when compiling,
761 * New auxiliary display (auxdisplay) peripheral has been added, this allows
765 * HD44780 driver added.
767 * Noritake Itron driver added.
769 * Grove LCD driver added (ported from existing sample).
780 * Added support for STM32C0 and STM32H5.
781 * Added DMA support for STM32H7.
784 * Added driver for Atmel SAM family ADC.
785 * Added driver for Gecko Incremental ADC.
786 * Added driver for Infineon CAT1 ADC.
787 * Added driver for TI ADS7052.
788 * Added driver for TI ADS114S0x family.
789 * Added drivers for Renesas SmartBond GPADC and SDADC.
793 * Added MCP7940N battery-backed RTC SRAM driver.
802 * Added support for the CAN-FD variant of the NXP FlexCAN controller using devicetree binding
805 * Added support for the NXP NXP S32 CANEXCEL controller using devicetree binding
808 * Added support for the Atmel SAM0 CAN controller using devicetree binding
820 * STM32F4: Added support for PLL I2S
829 * Added support on timer based counter on STM32H7 and STM32H5
830 * Added support on RTC based counter on STM32C0 and STM32H5
834 * Added support for STM32H5 AES
838 * Added support on STM32H5 series.
848 * Added support for ILI9342C display controller
849 * Added support for OTM8009A panel
853 * STM32C0: Added support for DMA
854 * STM32H5: Added support for GPDMA
855 * STM32H7: Added support for BDMA
856 * Added DMA support for the RP2040 SoC
864 * Added support for STM32H5 series.
886 * When building in native_posix, command line options have been added to select
897 * Added single-ended IO support for the RP2040 SoC
904 * Added support for STM32C0 and STM32H5 series
916 * Added a :dtcompatible:`zephyr,kscan-input` input to kscan compatibility driver.
921 * Added support on STM32H7
925 * Added PIO support for the RP2040 SoC
935 * Retained memory (retained_mem) driver has been added with backends for
940 * Added support for Infineon CAT1
941 * Added support for TI K3
942 * Added support for ARC emdsp
946 * Added support for STM32C0.
948 * Added PWM driver for Microchip XEC BBLED.
958 * Added support for ADP5360 PMIC
959 * Added support for nPM1300 PMIC
960 * Added support for Raspberry Pi Pico core supply regulator
964 * Support was added for using CPOL/CPHA SPI clock modes with SD cards, as
969 * Added generic voltage measurement sample
971 * Added STM32 Vref sensor driver
972 * Added STM32 Vref/Vbat measurement through the new generic voltage measurement sample
973 * Added temperature measurement driver for STM32C0 and STM32F0x0
975 * Added STM32 temperature measurement through the generic temperature measurement sample
979 * Added UART3 and UART4 configuration for ``gd32vf103`` SoCs.
980 * uart_altera: added new driver for Altera Avalon UART.
981 * uart_emul: added new driver for emulated UART.
983 * Added support for ESP32S3 SoC.
984 * Added support for RS-485 half duplex mode.
985 * uart_hostlink: added new driver for virtual UART via Synopsys ARC hostlink channels.
986 * uart_ifx_cat1: added new driver for Infineon CAT1 UART.
987 * uart_mcux: added power management support.
988 * uart_mcux_flexcomm: added support for asynchronous operations.
989 * uart_mcux_lpuart: added support for parity.
993 * uart_rpi_pico_pio: added new driver to support UART via
995 * uart_xmc4xxx: added support for asynchronous operations.
997 * Added hardware flow control support for the RP2040 SoC
1001 * Added support on STM32H5 series.
1005 * Support added for stopping Nordic nRF RTC system timer, which fixes an
1015 * Added remote wakeup support for the RP2040 SoC
1016 * Added Battery Charging (BC12) API and PI3USB9201 driver implementation.
1017 * Added new USB device controller drivers (using usb_dc API) for ITE IT82xx2
1019 * Added USB device controller driver skeleton for UDC API.
1020 * Reworked DWC2 driver and added support for STM32F4 SoC family
1024 * Added DS2482-800 1-Wire master driver. See the :dtcompatible:`maxim,ds2482-800`
1026 * Added :kconfig:option:`CONFIG_W1_NET_FORCE_MULTIDROP_ADDRESSING` which can be
1031 * Added support for STM32C0 and STM32H5 series
1038 * Added :c:func:`coap_append_descriptive_block_option` and
1040 * Added a :ref:`coap_client_interface` helper library, based on the existing CoAP APIs.
1063 * Added a mechanism to register a callback for handling DHCPv4 options.
1070 * Added a check on existing DNS servers before reconfigure.
1083 * Added HTTP service and resource iterable sections.
1093 * Added new radio API function to start continuous carrier wave transmission.
1097 * Added simple Babblesim echo test over IEEE802154 L2.
1109 * Added new :c:macro:`LWM2M_RD_CLIENT_EVENT_REG_UPDATE` event.
1110 * Added missing ``const`` qualifier in the APIs, where applicable.
1113 * Added possibility to register a callback function for FW update cancel action.
1114 * Added possibility to register a callback function for LwM2M send operation.
1115 * Added ISPO voltage sensor object support.
1119 * Added block transfer support on TX.
1121 * Added possibility to override default socket option configuration with a
1128 * Added generic ``OFFLOADED_NETDEV_L2`` for offloaded devices to allow
1142 * Added new ``NET_IF_IPV6_NO_ND`` and ``NET_IF_IPV6_NO_MLD`` interface flags,
1146 * Added new :zephyr:code-sample:`aws-iot-mqtt`.
1147 * Added a few missing NULL pointer checks in network interface functions.
1159 * Added :kconfig:option:`CONFIG_OPENTHREAD_CSL_TIMEOUT` option.
1161 * Added simple Babblesim echo test over OpenThread.
1176 * Added support for asynchronous connect for TCP sockets.
1184 * Added :kconfig:option:`CONFIG_NET_TCP_PKT_ALLOC_TIMEOUT` to allow to configure
1194 * Added ``tftp_put()`` API to support TFTP write request.
1212 * Added more detailed TWT response parameters printout in Wi-Fi shell.
1213 * Added new ``NET_EVENT_WIFI_TWT_SLEEP_STATE`` event to notify TWT sleep status.
1215 * Added connection status and AP capabilities verification before initiating
1221 * Added :kconfig:option:`CONFIG_WIFI_MGMT_RAW_SCAN_RESULTS` option, which
1228 * Added an extra parameter to disable Nagle's algorithm with TCP benchmarks.
1229 * Added support for handling multiple incoming TCP sessions.
1244 * Added USB Mass Storage class and CDC ECM class implementations for the new
1252 * Added :kconfig:option:`CONFIG_FS_FATFS_REENTRANT` to enable the FAT FS reentrant option.
1259 * Added :kconfig:option:`CONFIG_FS_LITTLEFS_FMP_DEV` to enable possibility of using LittleFS
1268 * ICMSG: added mutual exclusion access to SHMEM.
1273 * Added optional input expiration to shell MCUmgr transport, this allows
1282 for each part of a transfer. In addition, new functionality has been added
1356 * Retention subsystem has been added which adds enhanced features over
1361 * Boot mode retention module has been added which allows for setting/checking
1362 the boot mode of an application, initial support has also been added to
1369 * Added policy that every ``sqe`` will generate a ``cqe`` (previously an RTIO_SQE_TRANSACTION
1374 * Added a new policy event API that can be used to register expected events
1378 * Added a new device tree property ``zephyr,pm-device-runtime-auto`` to
1409 * Added ``CONFIG_MCUBOOT_CMAKE_WEST_SIGN_PARAMS`` that allows to pass arguments to
1415 * Added :kconfig:option:`CONFIG_FLASH_MAP_LABELS`, which will enable runtime access to the labels
1426 * Added psa_crypto sample back.
1442 * Two Babblesim based networking (802.15.4) tests have been added, which are run in Zephyr's CI