Lines Matching refs:default

17   CMSIS-DSP as the default backend.
45 * Newlib nano variant is no longer selected by default when
354 * Renamed default RAM region from ``SRAM`` to ``RAM``.
426 * Added the printing of function names by default when logging.
446 * Changed the default advertiser to be extended advertiser.
567 * The default console for the ``nrf52840dongle_nrf52840`` board has been
716 * STM32: Added support for STM32Cube HAL Ethernet API V2 on F4/F7/H7. By default disabled,
983 is 72MHz and default prescaler configuration is set to achieve 48MHz USB bus clock.
987 is it configured by default as the USB bus clock, but user has the ability to select
1054 are larger than the network device MTU. This is disabled by default but can
1061 interfaces by default.
1143 * Extended the default TCP out-of-order receive queue timeout to 2 seconds.
1571 - property ``disctrl`` default value changed from [10, 130, 39] to [10, 130, 39, 4]
1973 - new property: ``bias-pull-pin-default``
2033 * Newlib nano variant is no longer selected by default when
2071 opposed to the Zephyr default ``void main(void)``.
2090 default backend.
2117 * :kconfig:option:`CONFIG_LOG_PRINTK` is now by default enabled which means that
2394 a MCUmgr frame receive, this has been fixed by default in zephyr by routing
2399 but could also occur with UART) whereby the default shell receive ring
2400 buffer is insufficient has been fixed by making the default size 256 bytes
2406 then UpdateHub uses mbedTLS library as default crypto library.
2432 * Enabled ``eventfd()``, ``getopt()`` by default with :kconfig:option:`CONFIG_POSIX_API`.
2473 * Set RX size default to 256 if shell MCUmgr is enabled.
2576 * Initial attestation service has been disabled by default due to license
2635 - :github:`49484` - CONFIG_BOOTLOADER_SRAM_SIZE should not be defined by default
2696 - :github:`52886` - tests: subsys: fs: littlefs: filesystem.littlefs.default and filesystem.littlef…
2951 * :github:`54274` - newlib: Document CONFIG_NEWLIB_LIBC_NANO default change
3008 * :github:`53859` - RFC: Board porting guide: Do not assume OS or default ports for board files
3017 * :github:`53756` - esp32 - Wrong value for the default cpu freq -> crash on assert
3052 * :github:`53495` - RFC: treewide: python: argparse default configuration allows shortened command …
3177 * :github:`52709` - samples: subsys: nvs: sample.nvs.basic does not complete within twister default
3183 * :github:`52675` - I2C: STM32F0 can't switch to HSI clock by default and change timing
3248 * :github:`52291` - boards: thingy53: Enable USB-CDC by default
3579 * :github:`48520` - clang-format: #include reorder due to default: SortIncludesOptions != SI_Never
3667 * :github:`42998` - Should board.dts enable peripherals by default?
3708 * :github:`40924` - mgmt/mcumgr/lib: Do not re-upload image, by default, to the secondary slot