Lines Matching refs:stm32
512 <dt-guide>`. See the :dtcompatible:`st,stm32-fdcan` devicetree binding for more information.
540 * stm32: Check if clock device is ready before accessing clock control
582 * stm32: Check if clock device is ready before accessing.
607 * Fixed DMA priority configuration in the stm32 QSPI driver.
761 * Added power management support on ``stm32``.
1149 * :dtcompatible:`st,stm32-vbat`
1280 * :dtcompatible:`st,stm32-adc`: new ``has-vbat-channel`` property.
1281 * :dtcompatible:`st,stm32-can`: removed ``one-shot`` property.
1282 * :dtcompatible:`st,stm32-fdcan`: new ``clocks``, ``clk-divider`` properties.
1283 * :dtcompatible:`st,stm32-ospi`: new ``dmas``, ``dma-names`` properties.
1284 * :dtcompatible:`st,stm32-ospi-nor`: new ``four-byte-opcodes``,
1287 * :dtcompatible:`st,stm32-pwm`: removed deprecated ``st,prescaler`` property.
1288 * :dtcompatible:`st,stm32-rng`: new ``nist-config`` property.
1289 * :dtcompatible:`st,stm32-sdmmc`: new ``dmas``, ``dma-names``,
1291 * :dtcompatible:`st,stm32-temp-cal`: new ``ts-cal-resolution`` property;
1681 - :github:`43308` - driver: serial: stm32: uart will lost data when use dma mode[async mode]
1684 - :github:`43836` - stm32: g0b1: RTT doesn't work properly after stop mode
1824 * :github:`50635` - hal: stm32: valid pins were removed in the last version
1918 * :github:`49953` - stm32 gpio_basic_api test fail with CONFIG_ZTEST_NEW_API
1919 * :github:`49939` - stm32 adc driver_api test fails on stm32wb55 and stm32l5
1993 * :github:`49471` - stm32: dietemp node generates warning
2011 …thub:`49268` - tests: samples/boards/stm32/power_mgmt/serial_wakeup failed on mec15xxevb_assy6853 …
2163 * :github:`48175` - stm32 octospi flash driver
2276 * :github:`47105` - drivers: clock_control: stm32 common: wrong PLLCLK rate returned
2278 * :github:`47101` - drivers: clock_control: stm32 common: PLL_Q divider not converted to reg val
2287 * :github:`47051` - drivers: usb: stm32: usb_write size on bulk transfer problematic
2322 * :github:`46740` - stm32 flash ospi fails on stm32l5 and stm32u5 disco
2326 * :github:`46725` - stm32: QSPI flash driver have a broken priority configuration
2442 * :github:`45866` - drivers/entropy: stm32: non-compliant RNG configuration on some MCUs
2473 * :github:`45234` - stm32: Allow multiple GPIOs to trigger an interrupt
2496 * :github:`44725` - drivers: can: stm32: can_add_rx_filter() does not respect CONFIG_CAN_MAX_FILTER
2537 * :github:`43135` - stm32: uart: Support for wakeup from stop
2567 * :github:`41772` - stm32: G0: adc: Add support for VBAT internal channel