Lines Matching refs:default
49 default, all upstream code and modules have been converted to use
370 * Made the new LLCP implementation the default one. Enable
374 is the default now.
608 * Drivers are enabled by default based on their devicetree hardware declarations.
705 * nRF driver will use S0D1 drive mode for TWI/TWIM pins by default.
745 * Changed the FXOS8700 driver default mode from accel-only to hybrid.
1405 (will default to slot 1 if not provided).
1407 enabled by default, this makes thread priorities in the taskstat command
1617 * Enabled watchdog feed by default.
1726 - :github:`48520` - clang-format: #include reorder due to default: SortIncludesOptions != SI_Never
1748 - :github:`49484` - CONFIG_BOOTLOADER_SRAM_SIZE should not be defined by default
1898 * :github:`50099` - boards: pinnacle_100_dvk should enable QSPI and modem by default
2310 * :github:`46801` - Revisit modules and inclusion in the default manifest
2358 * :github:`46510` - bluetooth: controller: llcp: set refactored LLCP as default
2471 * :github:`45304` - drivers: can: CAN interfaces are brought up with default bitrate at boot, causi…
2547 * :github:`42684` - New LLCP handling of Preferred PHY (default tx/rx phy) needs a review
2639 * :github:`31290` - dts: arm: st: standardize pwm default property st,prescaler to 0
2642 * :github:`30694` - Some boards enable non-minimal peripherals by default