Lines Matching refs:stm32

305   * Enabled internal voltage reference source on stm32
329   * Enabled MSI range config in PLL mode on stm32
340   * Fixed alarm tick count on stm32
347   * Added CAP_NO_IV_PREFIX capability to stm32 driver
368   * Various fixes on stm32 dma management
390   * Added VLAN support to stm32
398   * Fixed stm32 when receiving data during initialization
402   * Added logs on stm32
411   * Added STM32L5 support to stm32 driver
433   * Added I2S master DMA support and clock output to stm32 driver
529   * Added support for parity setting from dts on stm32
540   * Added support for DMA client on stm32
557   * Fixed PMA leak at reset on stm32
570   * Disabled iwdg at boot on stm32
686   * Add stm32 sdmmc disk access driver, supports stm32f7 and stm32l4
826 * :github:`25452` - Some USB samples targeting stm32 are malfunctioning
855 * :github:`25284` - spi: stm32: dma_client: Cannot use RX only configuration
917 * :github:`24927` - stm32: Fix docs boards for doc generation
1105 * :github:`23762` - stm32: Revert nucleo_l152re to work at full speed
1112 * :github:`23678` - drivers/flash: stm32: Error in device name
1118 * :github:`23637` - Wrong channel computation in stm32 pwm driver
1120 * :github:`23623` - stm32 can2 not work properly
1144 * :github:`23555` - STM32 SDMMC disk access driver (based on stm32 cube HAL)
1249 * :github:`22083` - stm32: spi: Infinite loop of RXNE bit check
1250 * :github:`22078` - stm32: Shell module sample doesn't work on nucleo_l152re
1287 * :github:`20991` - test_timer_duration_period fails with stm32 lptimer
1294 * :github:`20825` - stm32: dma: enable dma with peripheral using DMAMUX
1325 * :github:`19038` - [zephyr branch 1.14 and master -stm32-netusb]:errors when i view RNDIS Device‘s…