Lines Matching full:devices

7 peripheral interface bus.  Devices on the bus can operate in
26 devices such as sensors.
28 Due to the nature of the I3C, there are devices on the bus where
34 for both I3C and I\ :sup:`2`\ C devices:
79    #. Do ``RSTDAA`` to reset dynamic addresses of connected devices.
80       If any connected devices have already been assigned an address,
85    #. Do ``DISEC`` to disable any events from devices.
90       * ``SETAASA`` may not be supported for all connected devices
98       still devices without addresses.
102         Provisioned ID to the list of registered I3C devices.
119       * This step can be skipped if there is no connected devices
133    #. Do ``ENEC`` to re-enable events from devices.
210 I3C Devices
213 For I3C devices, the ``reg`` property has 3 elements:
238 I\ :sup:`2`\ C Devices
241 For I\ :sup:`2`\ C devices where the device driver has support for
246 Otherwise, the ``reg`` property, similar to I3C devices,
250   a valid address as I\ :sup:`2`\ C devices do not support
285 Similar to I3C devices, the unit-address must match the ``reg``
289 Device Drivers for I3C Devices
303 I\ :sup:`2`\ C Devices under I3C Bus
309 existing I2C devices without any modifications to their device drivers.
325 interface I\ :sup:`2`\ C devices on the I3C bus where the associated
333            <... Nodes of I3C devices, if any ...>