Lines Matching full:current
8 devices to draw current exceeding the USB 2.0 specification limit of 0.5A, 2.5W.
12 sinks current from the USB connection.
27 Allowed PD (portable device) Current Draw from Charging Port IDEV_CHG 1.5 A
28 Charging Downstream Port Rated Current ICDP 1.5 - 5.0 A
29 Maximum Configured Current when connected to a SDP ICFG_MAX 500 mA
30 Dedicated Charging Port Rated Current IDCP 1.5 - 5.0 A
31 Suspend current ISUSP 2.5 mA
32 Unit load current IUNIT 100 mA
35 While the ICDP and IDCP rated currents go up to 5.0 A, the BC1.2 current is
63 default, the BC1.2 driver clamps the current to 1.5A to comply with the BC1.2
68 driver reports the available current as ISUSP (2.5 mA). The application may
69 increase the current draw to IUNIT (100 mA) when the connected USB host resumes
70 the USB bus and may increase the current draw to ICFG_MAX (500 mA) when the USB
78 ``bc12_set_result_cb()`` to indicate the current connection state of the