Lines Matching full:install

3 Install Linux Host Dependencies
59 Install Requirements and Dependencies
79          sudo apt-get install --no-install-recommends git cmake ninja-build gperf \
88          sudo dnf group install "Development Tools" "C Development Tools and Libraries"
89          sudo dnf install cmake ninja-build gperf dfu-util dtc wget which \
127 A :ref:`recent CMake version <install-required-tools>` is required. Check what
135 * Download and install a packaged cmake from the CMake project site.
149 * Download and install from the pre-built binaries provided by the CMake
151   For example, to install version 3.21.1 in :file:`~/bin/cmake`:
164      pip3 install --user cmake
167   install the new cmake into your ~/.local/bin folder so
178      sudo snap install cmake
189 A :ref:`recent DTC version <install-required-tools>` is required. Check what
191 either install a more recent one by building from source, or use the one that is
197 A :ref:`modern Python 3 version <install-required-tools>` is required. Check
200 If you have an older version, you will need to install a more recent Python 3.
207 Install the Zephyr Software Development Kit (SDK)
227 Follow these steps to install the Zephyr SDK:
257    in `Install Requirements and Dependencies`_.
276    If you install the Zephyr SDK outside any of these locations, you must