Lines Matching full:link
29 `MCU-Link <#mcu-link-onboard-debug-probe>`_, probes depending on
31 ST boards have the `ST-LINK probe <#stlink-v21-onboard-debug-probe>`_. Each
35 with pyOCD or OpenOCD debug host tools, or with J-Link firmware to communicate
36 with J-Link debug host tools.
42 | | **J-Link Debug** | **OpenOCD** | **pyOCD…
44 | | **J-Link External** | ✓ | ✓ | …
48 | | **LPC-Link2 J-Link** | ✓ | | …
50 | | **MCU-Link CMSIS-DAP** | | | …
52 | | **MCU-Link J-Link** | ✓ | | …
58 | | **OpenSDA J-Link** | ✓ | | …
60 | | **ST-LINK/V2-1** | ✓ | ✓ | *some STM32 …
78 the :ref:`mcu-link-onboard-debug-probe`, :ref:`lpc-link2-onboard-debug-probe`
84 - LPC55S69: :ref:`mcu-link-onboard-debug-probe`
91 .. _mcu-link-onboard-debug-probe:
93 MCU-Link Onboard Debug Probe
96 The MCU-Link onboard debug probe uses an LPC55S69 SOC. This probe supports
99 - :ref:`mcu-link-cmsis-onboard-debug-probe` (default firmware)
100 - :ref:`mcu-link-jlink-onboard-debug-probe`
102 This probe is programmed using the MCU-Link host tools, which are installed
106 .. _mcu-link-cmsis-onboard-debug-probe:
108 MCU-Link CMSIS-DAP Onboard Debug Probe
111 This is the default firmware installed on MCU-Link debug probes. The CMSIS-DAP
114 addition to debug probe functionality, the MCU-Link probes may also provide:
119 #. USB to UART, SPI and/or I2C interfaces (depending on MCU-Link
127 Once the MCU-Link host tools are installed, the following steps are
130 1. Make sure the MCU-Link utility is present on your host machine. This can
133 #. Put the MCU-Link microcontroller into DFU boot mode by attaching the DFU
138 #. Run the ``program_CMSIS`` script, found in the installed MCU-Link ``scripts``
143 .. _mcu-link-jlink-onboard-debug-probe:
145 MCU-Link JLink Onboard Debug Probe
155 updated. Once the MCU-Link host tools are installed, the following steps are
158 1. Make sure the MCU-Link utility is present on your host machine. This can
161 #. Put the MCU-Link microcontroller into DFU boot mode by attaching the DFU
166 #. Run the ``program_JLINK`` script, found in the installed MCU-Link ``scripts``
223 LPC-Link2 J-Link Onboard Debug Probe
226 .. note:: On some boards, the J-Link probe firmware will no longer power the
236 The probe may be updated to use the J-Link firmware with the following steps:
312 OpenSDA J-Link Onboard Debug Probe
319 This probe is realized by programming the OpenSDA microcontroller with J-Link
320 OpenSDA firmware. Segger provides `OpenSDA J-Link Generic Firmwares`_ and
321 `OpenSDA J-Link Board-Specific Firmwares`_, where the latter is generally
349 J-Link External Debug Probe
352 `Segger J-Link`_ is a family of external debug probes, including J-Link EDU,
353 J-Link PLUS, J-Link ULTRA+, and J-Link PRO, that support a large number of
365 ST-LINK/V2-1 Onboard Debug Probe
368 ST-LINK/V2-1 is a serial and debug adapter built into all Nucleo and Discovery
383 to work with J-Link. To do this, SEGGER offers a firmware upgrading the
384 ST-LINK/V2-1 on board on the Nucleo and Discovery boards. This firmware makes
385 the ST-LINK/V2-1 compatible with J-LinkOB, allowing users to take advantage of
386 most J-Link features like the ultra fast flash download and debugging speed or
389 More information about upgrading ST-LINK/V2-1 to JLink or restore ST-Link/V2-1
390 firmware please visit: `Segger over ST-Link`_
392 Flash and debug with ST-Link
399 OpenOCD is available by default on ST-Link and configured as the default flash
410 .. tab:: _`Using Segger J-Link`
412 Once STLink is flashed with SEGGER FW and J-Link GDB server is installed on your
416 runner to J-Link. Alternatively, you might add the following line to your
448 SEGGER J-Link V6.30f - Real time terminal output
449 J-Link STLink V21 compiled Jun 26 2017 10:35:16 V1.0, SN=773895351
459 Updating or restoring ST-Link firmware
462 ST-Link firmware can be updated using `STM32CubeProgrammer Tool`_.
466 Once installed, you can update attached board ST-Link firmware with the
495 https://www.segger.com/products/debug-probes/j-link/models/other-j-links/lpcxpresso-on-board/
500 .. _OpenSDA J-Link Generic Firmwares:
503 .. _OpenSDA J-Link Board-Specific Firmwares:
506 .. _Segger J-Link:
507 https://www.segger.com/products/debug-probes/j-link/
509 .. _Segger over ST-Link:
510 https://www.segger.com/products/debug-probes/j-link/models/other-j-links/st-link-on-board/