Lines Matching refs:broadcast

77 The CAP initiator also supports broadcast audio as a source.
191 When doing broadcast
194 To start a broadcast as the CAP initiator there are a few steps to be done:
197 2. Create and configure a broadcast source
200 The following commands will setup a CAP broadcast source using the 16_2_1 preset (defined by BAP):
209    bap preset broadcast 16_2_1
216 The broadcast source is created by the :code:`cap_initiator ac_12`, :code:`cap_initiator ac_13`,
217 and :code:`cap_initiator ac_14` commands, configuring the broadcast source for the defined audio
218 configurations from BAP. The broadcast source can then be stopped with
221 The metadata of the broadcast source can be updated at any time, including when it is already
246 information about broadcast sources to CAP Acceptors or coordinate capture and rendering information
269      broadcast_reception_start : Start broadcast reception with
273      broadcast_reception_stop  : Stop broadcast reception <src_id [...]>
274      distribute_broadcast_code : Distribute broadcast code <src_id [...]> <broadcast_code>
446 Starting and stopping broadcast reception
459    Starting broadcast reception on 1 connection(s)
462    Stopping broadcast reception on 1 connection(s)
465 Distributing the broadcast code
478    Starting broadcast reception on 1 connection(s)
481    Distribute broadcast code completed