Lines Matching refs:send
61 By default, the transmission parameters are set to send messages to the provisioned address and
85 the Bluetooth Mesh shell can send raw mesh messages through the network.
87 For example, to send a Generic OnOff Set message, call::
89 uart:~$ mesh test net-send 82020100
96 the device will only send packets to itself. To change the destination address to the All Nodes
102 configured network and application keys will receive and process the messages we send.
230 ``mesh test net-send <HexString>``
236 * ``HexString`` Raw hexadecimal representation of the message to send.
484 * ``NetKeyIdx``: Index of the network key to send Solicitation PDUs to.
1086 Perform a BLOB transfer to Target nodes. The BLOB Transfer Client will send a dummy BLOB to
1267 ``mesh models dfu cli send <SlotIdx> [<Group>]``
1272 * ``SlotIdx``: Index of the local DFU image slot to send.
1398 * ``FwIdx``: Index of the firmware slot to send to ``Addr``.
1429 * ``SlotIdx``: Index of the local image slot to send.
1684 ``mesh models opagg seq-send``