Lines Matching refs:off
136 - Boolean values are denoted in the API documentation as ``<val(off, on)>``.
137 - ``on``, ``off``, ``enabled``, ``disabled``, ``1``, ``0``
144 ``mesh lpn set <value: off, on>``. Mandatory parameters are marked with angle brackets (e.g.
213 ``mesh lpn set <Val(off, on)>``
216 Enable or disable Low Power operation. Once enabled, the device will turn off its radio and
244 ``mesh test iv-update-test <Val(off, on)>``
288 ``mesh prov pb-gatt <Val(off, on)>``
301 ``mesh prov pb-adv <Val(off, on)>``
392 ``mesh prov beacon-listen <Val(off, on)>``
558 ``mesh models cfg beacon [Val(off, on)]``
574 ``mesh models cfg friend [Val(off, on)]``
586 ``mesh models cfg gatt-proxy [Val(off, on)]``
598 ``mesh models cfg relay [<Val(off, on)> [<Count> [Int(ms)]]]``
609 …* ``Count``: Sets the new relay retransmit count if ``val`` is ``on``. Ignored if ``val`` is ``off…
610 …n``. Legal interval range is 10-320 milliseconds. Ignored if ``val`` is ``off``. Defaults to ``2…
736 ``mesh models cfg model pub <Addr> <MID> [CID] [<PubAddr> <AppKeyIdx> <Cred(off, on)> <TTL> <PerRes…
763 ``mesh models cfg model pub-va <Addr> <UUID(1-16 hex)> <AppKeyIdx> <Cred(off, on)> <TTL> <PerRes> <…
1617 ``mesh models prb priv-beacon-set <Val(off, on)> <RandInt(10s steps)>``
1634 ``mesh models prb priv-gatt-proxy-set <Val(off, on)>``