Lines Matching refs:local

46 	uart:~$ mesh prov local 0 0x0001
67 By setting the destination address to the local unicast address (``0x0001`` in the
68 ``mesh prov local`` command above), we can perform self-configuration through any of the
95 application key indexes. As the destination address points to the local unicast address by default,
106 	local unicast address before issuing any configuration commands.
151 	:local:
166 ``mesh reset-local``
169 	Reset the local mesh node to its initial unprovisioned state. This command will also clear
381 ``mesh prov local <NetKeyIdx> <Addr> [IVI]``
515 * Provision the local device (``mesh prov local``).
517 * Monitor the composition data of the local node (``mesh models cfg get-comp``).
518 * Configure the local node as desired with the Configuration Client commands.
1263 	* ``SlotIdx``: Index of the local DFU image slot to check.
1272 	* ``SlotIdx``: Index of the local DFU image slot to send.
1429 	* ``SlotIdx``: Index of the local image slot to send.
1946 	automatically add it to the local node's list of known network keys.
1965 	does not automatically add it to the local node's list of known application keys.