Lines Matching full:interval

59 Transmission of segments is separated by a segment transmission interval (see the
60 `SAR Segment Interval Step`_ state). Other configurable time intervals and delays available for the
63 * Interval between unicast retransmissions (see the states `SAR Unicast Retransmissions Interval St…
64 * Interval between multicast retransmissions (see the `SAR Multicast Retransmissions Interval Step`…
65 * Segment reception interval (see the `SAR Receiver Segment Interval Step`_ state).
75 …unicast~retransmissions~interval~step + unicast~retransmissions~interval~increment \times (TTL - 1)
79 retransmissions interval step.
82 interval.
95    min(SegN + 0.5 , acknowledgment~delay~increment) \times segment~reception~interval
124 * SAR Segment Interval Step
127 * SAR Unicast Retransmissions Interval Step
128 * SAR Unicast Retransmissions Interval Increment
130 * SAR Multicast Retransmissions Interval Step
140 * SAR Receiver Segment Interval Step
142 SAR Segment Interval Step
145 SAR Segment Interval Step state holds a value that controls the interval between transmissions of
146 segments of a segmented message. The interval is measured in milliseconds.
149 value. Segment transmission interval is then calculated using the following formula:
173 SAR Unicast Retransmissions Interval Step
176 The value of this state controls the interval step used for delaying the retransmissions of
177 unacknowledged segments of a segmented message to a unicast address. The interval step is measured
181 default value.  This value is then used to calculate the interval step using the following formula:
188 SAR Unicast Retransmissions Interval Increment
191 SAR Unicast Retransmissions Interval Increment holds a value that controls the interval increment
212 SAR Multicast Retransmissions Interval Step
215 This state holds a value that controls the interval between retransmissions of all segments in a
216 segmented message to a multicast address.  The interval is measured in milliseconds.
219 default value that is used to calculate the interval using the following formula:
242 This state holds a value that controls the delay increment of an interval used for delaying the
274 SAR Receiver Segment Interval Step
277 The SAR Receiver Segment Interval Step defines the segments reception interval step used for
278 delaying the transmission of an acknowledgment message after receiving a new segment. The interval
282 and calculate the interval using the following formula: