Lines Matching refs:will
48 :c:enum:`bt_mesh_dfu_effect`. The DFU effect return parameter will be communicated back to the
49 Distributor, and should indicate what effect the firmware update will have on the mesh state of the
57 If the transfer will cause the device to change its Composition Data or become
60 When the transfer will cause the Composition Data to change, and the
62 will be represented by Composition Data Pages 128, 129, and 130. The Models Metadata of the new
63 firmware image will be represented by Models Metadata Page 128. Composition Data Pages 0, 1 and 2,
64 and Models Metadata Page 0, will represent the Composition Data and the Models Metadata of the old
71 Metadata. The old Composition Data will then be loaded into Composition Data Pages 0, 1 and 2,
72 while the Composition Data in the new firmware will be loaded into Composition Data Pages 128, 129
73 and 130. The Models Metadata for the old image will be loaded into Models Metadata Page 0, and the
74 Models Metadata for the new image will be loaded into Models Metadata Page 128.
88 pointer to the BLOB Writer the BLOB Transfer Server will send the BLOB to.
123 The Distributor will read out the firmware image table to confirm that the transfer was successfully