Lines Matching refs:profiles

38 LE Audio architecture. The GAF contains the profiles and services that allows
39 higher layer applications and profiles to set up streams, change volume, control
197 The top-level profiles TMAP and HAP are not part of the GAF, but rather provide
200 GAF and the top layer profiles gave been implemented in Zephyr with the following structure.
358 The LE Audio profiles depend on other profiles and services, as outlined in the following tables.
390 * As the table shows, the Broadcast Source role has no dependencies on other LE Audio profiles or s…
540 The dependencies of the higher level profiles (GMAP, HAP, PBP and TMAP) are listed in the following…
692 The following table shows the current status and support of the profiles in the
870 To use any of the profiles in the Bluetooth Audio Stack, including the top-level
871 profiles outside of GAF, :kconfig:option:`CONFIG_BT_AUDIO` shall be enabled.
872 This Kconfig option allows the enabling of the individual profiles inside of the
874 enabling higher-layer profiles (such as CAP, TMAP and HAP) will typically
875 require enabling some of the lower layer profiles.
879 rendering/capture control profiles, or vice versa. Using the higher layer
880 profiles will however typically provide a better user experience and better
886 The Common Audio Profile introduces restrictions and requirements on the lower layer profiles.
891 how they correspond to procedures from the other profiles. The circles with I, A and C show whether
1205 use other profiles and services that do not require such security.