Lines Matching full:with
8 STM32H573IIK3Q microcontroller with TrustZone |reg|. Here are some highlights of
13 - 1.54-inch 240x240 pixels TFT-LCD with LED backlight and touch panel
14 - USB Type-C |trade| Host and device with USB power-delivery controller
15 - SAI Audio DAC stereo with one audio jacks for input/output,
16 - ST MEMS digital microphone with PDM interface
23 …- STMod+ expansion connector with fan-out expansion board for Wi‑Fi |reg|, Grove and mikroBUS |tra…
34 - On-board STLINK-V3E debugger/programmer with USB re-enumeration capability:
52 - Core: ARM |reg| 32-bit Cortex |reg| -M33 CPU with TrustZone |reg| and FPU.
59 - Arm |reg| TrustZone |reg| with ARMv8-M mainline security extension
62 - Flexible lifecycle scheme with secure debug authentication
65 - Secure data storage with hardware unique key (HUK)
66 - Secure firmware upgrade support with TF-M
67 - 2x AES coprocessors including one with DPA resistance
83 - Internal 48 MHz (HSI48) with recovery system
88 - Embedded regulator (LDO) with three configurable range output to supply the digital circuitry
91 - RTC with HW calendar, alarms and calibration
92 - Up to 139 fast I/Os, most 5 V-tolerant, up to 10 I/Os with independent supply down to 1.08 V
96 …- 2x 32-bit timers with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder in…
105 - 640 KB of SRAM including 64 KB with hardware parity check and 320 Kbytes with flexible ECC
107 …- Flexible external memory controller with up to 16-bit data bus: SRAM, PSRAM, FRAM, SDRAM/LPSDR S…
108 …- 1x OCTOSPI memory interface with on-the-fly decryption and support for serial PSRAM/NAND/NOR, Hy…
113 - 2x 12-bit ADC with up to 5 MSPS in 12-bit
125 - 6x SPIs including 3 muxed with full-duplex I2S
133 - 1x Ethernel MAC interface with DMA controller
242 Run a serial host program to connect with your Nucleo board:
264 Waiting for OpenOCD support, debugging could be performed with pyOCD which
265 requires to enable "pack" support with the following pyOCD command: