Lines Matching +full:regulator +full:- +full:boot +full:- +full:off
6 The STWIN.box (STEVAL-STWINBX1) is a development kit that features an Arm|reg| Cortex|reg|-M33 base…
10 The STEVAL-STWINBX1 kit consists of an STWIN.box core system, a 480mAh LiPo battery, an adapter for…
13 More information about the board can be found at the `STEVAL-STWINBX1 Development kit website`_.
19 The STEVAL-STWINBX1 provides motion, environmental, and audio
20 sensor data through either the built-in RS485 transceiver, BLE, Wi-Fi, and
23 - Multisensing wireless platform for vibration monitoring and ultrasound detection
24 - Baby crying detection with Cloud AI learning
25 - Barometer / environmental monitoring
26 - Vehicle / goods tracking
27 - Vibration monitoring
28 - Compass and inclinometer
29 - Sensor data logger
37 The STM32U585xx devices are an ultra-low-power microcontrollers family (STM32U5
38 Series) based on the high-performance Arm|reg| Cortex|reg|-M33 32-bit RISC core.
41 - Ultra-low-power with FlexPowerControl (down to 300 nA Standby mode and 19.5 uA/MHz run mode)
42 - Core: ARM |reg| 32-bit Cortex |reg| -M33 CPU with TrustZone |reg| and FPU.
43 - Performance benchmark:
45 - 1.5 DMPIS/MHz (Drystone 2.1)
46 - 651 CoreMark |reg| (4.07 CoreMark |reg| /MHZ)
48 - Security and cryptography
50 - Arm |reg| TrustZone |reg| and securable I/Os memories and peripherals
51 - Flexible life cycle scheme with RDP (readout protection) and password protected debug
52 - Root of trust thanks to unique boot entry and secure hide protection area (HDP)
53 - Secure Firmware Installation thanks to embedded Root Secure Services
54 - Secure data storage with hardware unique key (HUK)
55 - Secure Firmware Update support with TF-M
56 - 2 AES coprocessors including one with DPA resistance
57 - Public key accelerator, DPA resistant
58 - On-the-fly decryption of Octo-SPI external memories
59 - HASH hardware accelerator
60 - Active tampers
61 - True Random Number Generator NIST SP800-90B compliant
62 - 96-bit unique ID
63 - 512-byte One-Time Programmable for user data
64 - Active tampers
66 - Clock management:
68 - 4 to 50 MHz crystal oscillator
69 - 32 kHz crystal oscillator for RTC (LSE)
70 - Internal 16 MHz factory-trimmed RC ( |plusminus| 1%)
71 - Internal low-power 32 kHz RC ( |plusminus| 5%)
72 - 2 internal multispeed 100 kHz to 48 MHz oscillators, including one auto-trimmed by
74 - 3 PLLs for system clock, USB, audio, ADC
75 - Internal 48 MHz with clock recovery
77 - Power management
79 - Embedded regulator (LDO)
80 - Embedded SMPS step-down converter supporting switch on-the-fly and voltage scaling
82 - RTC with HW calendar and calibration
83 - Up to 136 fast I/Os, most 5 V-tolerant, up to 14 I/Os with independent supply down to 1.08 V
84 - Up to 24 capacitive sensing channels: support touchkey, linear and rotary touch sensors
85 - Up to 17 timers and 2 watchdogs
87 - 2x 16-bit advanced motor-control
88 - 2x 32-bit and 5 x 16-bit general purpose
89 - 4x low-power 16-bit timers (available in Stop mode)
90 - 2x watchdogs
91 - 2x SysTick timer
93 - ART accelerator
95 - 8-Kbyte instruction cache allowing 0-wait-state execution from Flash and
97 - 4-Kbyte data cache for external memories
99 - Memories
101 - 2-Mbyte Flash memory with ECC, 2 banks read-while-write, including 512 Kbytes with 100 kcycles
102 - 786-Kbyte SRAM with ECC OFF or 722-Kbyte SRAM including up to 322-Kbyte SRAM with ECC ON
103 - External memory interface supporting SRAM, PSRAM, NOR, NAND and FRAM memories
104 - 2 Octo-SPI memory interfaces
106 - Rich analog peripherals (independent supply)
108 - 14-bit ADC 2.5-Msps, resolution up to 16 bits with hardware oversampling
109 - 12-bit ADC 2.5-Msps, with hardware oversampling, autonomous in Stop 2 mode
110 - 12-bit DAC, low-power sample and hold
111 - 2 operational amplifiers with built-in PGA
112 - 2 ultra-low-power comparators
114 - Up to 22 communication interfaces
116 - USB Type-C / USB power delivery controller
117 - USB OTG 2.0 full-speed controller
118 - 2x SAIs (serial audio interface)
119 - 4x I2C FM+(1 Mbit/s), SMBus/PMBus
120 - 6x USARTs (ISO 7816, LIN, IrDA, modem)
121 - 3x SPIs (5x SPIs with dual OCTOSPI in SPI mode)
122 - 1x FDCAN
123 - 2x SDMMC interface
124 - 16- and 4-channel DMA controllers, functional in Stop mode
125 - 1 multi-function digital filter (6 filters)+ 1 audio digital filter with
126 sound-activity detection
128 - CRC calculation unit
129 - Development support: serial wire debug (SWD), JTAG, Embedded Trace Macrocell |trade|
130 - True Random Number Generator (RNG)
132 - Graphic features
134 - Chrom-ART Accelerator (DMA2D) for enhanced graphic content creation
135 - 1 digital camera interface
137 - Mathematical co-processor
139 - CORDIC for trigonometric functions acceleration
140 - FMAC (filter mathematical accelerator)
145 - `STM32U585 on www.st.com`_
146 - `STM32U585 reference manual`_
151 - **BlueNRG-M2SA** Bluetooth|reg| low energy v5.2 wireless technology module
152 (`BlueNRG-M2 datasheet`_)
153 - **MXCHIP EMW3080** (802.11 b/g/n compliant Wi-Fi module)
154 - **ST25DV64K** dynamic NFC/RFID tag IC with 64-Kbit EEPROM
156 - USB Type-C|trade| connector (power supply and data)
157 - STDC14 programming connector for **STLINK-V3MINI**
158 (`stlink-v3mini`_)
159 - microSD card socket
164 - **ILPS22QS** MEMS pressure sensor
166 - **STTS22H** Digital temperature sensor
168 - **TSV912** wide-bandwidth (8 MHz) rail-to-rail I/O op-amp
170 …- **ISM330DHCX** iNEMO IMU, 3D accelerometer and 3D gyroscope with Machine Learning Core and Finit…
172 - **IIS3DWB** wide bandwidth accelerometer
174 - **IIS2DLPC** high-performance ultra-low-power 3-axis accelerometer for industrial applications
176 - **IIS2MDC** 3-axis magnetometer
178 …- **IIS2ICLX** high-accuracy, high-resolution, low-power, 2-axis digital inclinometer with Machine…
180 - **IMP23ABSU** analog MEMS microphone
182 - **IMP34DT05** digital MEMS microphone
188 - 2x user LEDs
190 - **led0** (Green)
191 - **led1** (Orange)
193 - 4x buttons/switch
195 - **User** / **boot0** button, available to user application
199 - **RESET** button, used to reset the board
200 - **PWR** button, used to Power on/off the board
203 For more details please refer to `STEVAL-STWINBX1 board User Manual`_.
206 ------------
208 STEVAL-STWINBX1 System Clock could be driven by an internal or external oscillator,
214 -----------
220 -------------
222 STEVAL-STWINBX1 can be connected as a USB device to a PC host through its USB-C connector.
223 The final application may use it to declare STEVAL-STWINBX1 device as belonging to a
228 -------
233 - through common CDC ACM UART backend configuration for all boards
235 - through USART2 which is available on SWD connector (CN4). In this case a JTAG adapter
236 can be used to connect STEVAL-STWINBX1 and have both SWD and console lines available.
240 …- in your prj.conf, override the board's default configuration by setting :code:`CONFIG_BOARD_SERI…
242 - add an overlay file named ``<board>.overlay``:
244 .. code-block:: dts
249 zephyr,shell-uart = &usart2;
257 -------------------------
265 No additional hardware is required except a USB-C cable. This method is fully
266 supported by :ref:`flash-debug-host-tools`.
272 The STEVAL-STWINBX1 does not include a on-board debug probe.
273 It requires to connect additional hardware, like a ST-LINK/V3
274 embedded debug tool, to the board STDC14 connector (CN4) labeled ``MCU-/SWD``.
277 Install dfu-util
278 ----------------
281 Required only to use dfu-util runner.
283 It is recommended to use at least v0.9 of dfu-util. The package available in
284 Debian and Ubuntu can be quite old, so you might have to build dfu-util from source.
286 at the `DFU-UTIL website`_
289 ---------------------------
297 Flash an Application to STEVAL-STWINBX1
298 ------------------------------------------
302 1. USB-C cable not connected
304 While pressing the USER button, connect the USB-C cable to the USB OTG STEVAL-STWINBX1
307 2. USB-C cable connected
315 .. code-block:: console
317 $ sudo dfu-util -l
318 dfu-util 0.9
320 Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
321 Copyright 2010-2019 Tormod Volden and Stefan Schmidt
323 Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
325 …Found DFU: [0483:df11] ver=0200, devnum=58, cfg=1, intf=0, path="3-1", alt=2, name="@OTP Memory …
326 …Found DFU: [0483:df11] ver=0200, devnum=58, cfg=1, intf=0, path="3-1", alt=1, name="@Option Bytes …
327 …Found DFU: [0483:df11] ver=0200, devnum=58, cfg=1, intf=0, path="3-1", alt=0, name="@Internal Flas…
331 .. code-block:: console
334 usb 3-1: new full-speed USB device number 16 using xhci_hcd
335 usb 3-1: New USB device found, idVendor=0483, idProduct=df11, bcdDevice= 2.00
336 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
337 usb 3-1: Product: DFU in FS Mode
338 usb 3-1: Manufacturer: STMicroelectronics
339 usb 3-1: SerialNumber: 207136863530
342 (:zephyr:code-sample:`stwinbx1_sensors`) that reads sensors data and outputs
345 .. _STEVAL-STWINBX1 Development kit website:
346 https://www.st.com/en/evaluation-tools/steval-stwinbx1.html
348 .. _STEVAL-STWINBX1 board User Manual:
349 …resource/en/user_manual/um2965-getting-started-with-the-stevalstwinbx1-sensortile-wireless-industr…
352 https://www.st.com/en/microcontrollers-microprocessors/stm32u575-585.html
355 …https://www.st.com/resource/en/reference_manual/rm0456-stm32u575585-armbased-32bit-mcus-stmicroele…
358 https://www.st.com/en/development-tools/stm32cubeprog.html
360 .. _DFU-UTIL website:
361 http://dfu-util.sourceforge.net/
366 .. _BlueNRG-M2 datasheet:
367 https://www.st.com/en/product/BlueNRG-M2
372 .. _stlink-v3mini:
373 https://www.st.com/en/development-tools/stlink-v3mini.html
376 https://www.st.com/en/mems-and-sensors/ilps22qs.html
379 https://www.st.com/en/mems-and-sensors/stts22h.html
382 https://www.st.com/en/automotive-analog-and-power/tsv912.html
385 https://www.st.com/en/mems-and-sensors/ism330dhcx.html
388 https://www.st.com/en/mems-and-sensors/iis3dwb.html
391 https://www.st.com/en/mems-and-sensors/iis2dlpc.html
394 https://www.st.com/en/mems-and-sensors/iis2mdc.html
397 https://www.st.com/en/mems-and-sensors/iis2iclx.html
400 https://www.st.com/en/mems-and-sensors/imp23absu.html
403 https://www.st.com/en/mems-and-sensors/imp34dt05.html