Lines Matching full:nucleo

6 The Nucleo L452RE(-P) boards feature an ARM Cortex-M4 based STM32L452RE MCU
9 - ST Nucleo L452RE
10 - ST Nucleo L452RE-P
25 The main difference between the ST Nucleo L452RE and the L452RE-P (note the missing
29 More information about the boards can be found at the `Nucleo L452RE website`_ and
30 the `Nucleo L452RE-P website`_.
130 And for Nucleo L452RE-P in this defconfig file:
137 Nucleo L452RE Board has 6 GPIO controllers. These controllers are responsible for pin muxing,
144    :alt: Nucleo L452RE Pinout
148    :alt: Nucleo L452RE-P Pinout
150 For more details please refer to `ST Nucleo L452RE User Manual`_ or
151 `ST Nucleo L452RE-P User Manual`_.
174 Nucleo L452RE System Clock could be driven by internal or external oscillator,
181 Nucleo L452RE board has 3 U(S)ARTs. The Zephyr console output is assigned to UART2.
188 Nucleo L452RE board includes an ST-LINK/V2-1 embedded debug tool interface.
208 Flashing an application to Nucleo L452RE
211 Connect the Nucleo L452RE to your host computer using the USB port,
212 then run a serial host program to connect with your Nucleo board.
226 For Nucleo L452RE-P, use this command instead:
253    https://www.st.com/en/evaluation-tools/nucleo-l452re.html
256    https://www.st.com/en/evaluation-tools/nucleo-l452re-p.html
258 .. _ST Nucleo L452RE User Manual:
261 .. _ST Nucleo L452RE-P User Manual: