Lines Matching +full:i3c +full:- +full:prescaler

5  * SPDX-License-Identifier: Apache-2.0
9 #include <st/h5/stm32h563zitx-pinctrl.dtsi>
12 #include <zephyr/dt-bindings/input/input-event-codes.h>
16 		compatible = "gpio-leds";
32 		compatible = "gpio-keys";
41 		compatible = "pwm-leds";
52 	clock-frequency = <DT_FREQ_M(8)>; /* STLink 8MHz clock */
53 	hse-bypass;
66 	div-m = <2>;
67 	mul-n = <120>;
68 	div-p = <2>;
69 	div-q = <3>;
70 	div-r = <2>;
76 	pinctrl-0 = <&i2c1_scl_pb8 &i2c1_sda_pb9>;
77 	pinctrl-names = "default";
82 	pinctrl-0 =  <&i3c1_scl_pd12 &i3c1_sda_pd13>;
83 	pinctrl-names = "default";
84 	i3c-scl-hz = <12500000>;
90 	clock-frequency = <DT_FREQ_M(240)>;
91 	ahb-prescaler = <1>;
92 	apb1-prescaler = <2>;
93 	apb2-prescaler = <1>;
94 	apb3-prescaler = <2>;
98 	pinctrl-0 = <&lpuart1_tx_pb6 &lpuart1_rx_pb7>;
99 	pinctrl-names = "default";
100 	current-speed = <115200>;
105 	pinctrl-0 = <&usart3_tx_pd8 &usart3_rx_pd9>;
106 	pinctrl-names = "default";
107 	current-speed = <115200>;
112 	pinctrl-0 = <&spi1_sck_pa5 &spi1_miso_pg9 &spi1_mosi_pb5>;
113 	pinctrl-names = "default";
114 	cs-gpios = <&gpiod 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
119 	st,prescaler = <10000>;
124 		pinctrl-0 = <&tim3_ch3_pb0>;
125 		pinctrl-names = "default";
149 	pinctrl-0 = <&dac1_out2_pa5>;  /* Zio D13 (on CN7) */
150 	pinctrl-names = "default";
157 	pinctrl-0 = <&adc1_inp3_pa6 &adc1_inp15_pa3>; /* Zio A0, Zio D35 */
158 	pinctrl-names = "default";
159 	st,adc-clock-source = "ASYNC";
160 	st,adc-prescaler = <6>;
165 	pinctrl-0 = <&fdcan1_rx_pd0 &fdcan1_tx_pd1>;
166 	pinctrl-names = "default";
169 	clk-divider = <2>;
175 		compatible = "fixed-partitions";
176 		#address-cells = <1>;
177 		#size-cells = <1>;
184 			label = "image-0";
188 			label = "image-1";
199 	pinctrl-0 = <&usb_dm_pa11 &usb_dp_pa12>;
200 	pinctrl-names = "default";