Lines Matching full:board

1 .. zephyr:board:: nucleo_f030r8
5 The STM32 Nucleo-64 development board with STM32F030R8 MCU, supports Arduino and ST morpho connecti…
7 The STM32 Nucleo board provides an affordable, and flexible way for users to try out new concepts,
15 The STM32 Nucleo board integrates the ST-LINK/V2-1 debugger and programmer.
17 The STM32 Nucleo board comes with the STM32 comprehensive software HAL library together
20 More information about the board can be found at the `Nucleo F030R8 website`_.
32 - On-board ST-LINK/V2-1 debugger/programmer with SWD connector:
36 - Flexible board power supply:
61 .. zephyr:board-supported-hw::
71 Board connectors:
91 For more details please refer to `STM32 Nucleo-64 board User Manual`_.
96 Nucleo F030R8 board includes an ST-LINK/V2-1 embedded debug tool interface.
98 Applications for the ``nucleo_f030r8`` board configuration can be built and
107 The board is configured to be flashed using west `STM32CubeProgrammer`_ runner,
110 Alternatively, OpenOCD, JLink, prob-rs can also be used to flash the board using
126    :board: nucleo_f030r8
131 If using the C-01 board, select revision '1' that supports the board.
135    :board: nucleo_f030r8@1
146    :board: nucleo_f030r8
154    :board: nucleo_f030r8@1
158 Board Revisions
161 Nucleo F030R8 has some version of board variants.
162 `STM32 Nucleo-64 board User Manual`_ mentions to Nucleo board variants.
164 …| *The board version MB1136 C-01 or MB1136 C-02 is mentioned on the sticker, placed on the bottom …
165    | *The board marking MB1136 C-01 corresponds to a board, configured as HSE not used.*
166 …| *The board marking MB1136 C-02 (or higher) corresponds to a board, configured to use ST-LINK MCO…
169 If using the C-01 board, select revision **1**.
186 .. _STM32 Nucleo-64 board User Manual: