Lines Matching +full:4 +full:x8
20 * 32-bits, offset 0x8, SPI_MAP_CTRL[0] selects the mode of operation of the SPI
27 * 32-bits, offset 0x8, This register controls the mapping of the UART signals
37 #define PM2_OFFSET (4)
65 /* Pmod1[4:1] are connected to DW GPIO Port C[11:8] */
67 /* Pmod1[4:1] are connected to DW UART0 signals */
75 * Pmod2[4:1] are connected to DW GPIO Port C[15:12],
79 /* connect I2C to Pmod2[4:1] and halt/run interface to Pmod2[10:7] */
82 * Pmod3[4:1] are connected to DW GPIO Port C[19:16],
87 * Pmod3[4:3] are connected to DW I2C signals,
93 * Pmod4[4:1] are connected to DW GPIO Port C[23:20],
98 * Pmod4[4:3] are connected to DW I2C signals,
99 * Pmod4[2:1] are connected to DW GPIO Port D[5:4],
104 /* Pmod5[4:1] are connected to DW GPIO Port C[27:24] */
106 /* Pmod5[4:1] are connected to DW SPI Master signals using CS1_N */
113 /* Pmod6[4:1] are connected to DW GPIO Port C[31:28] */
115 /* Pmod6[4:1] are connected to DW SPI Master signals using CS0_N */