Lines Matching +full:host +full:- +full:interface

10 Nordic and non-Nordic host boards.
12 The nRF7002 EK unlocks low-power Wi-Fi 6 capabilities for your host device. It support dual-band Wi…
14 Seamlessly connect to Wi-Fi networks and leverage Wi-Fi-based locationing, enabling advanced
15 features such as SSID sniffing of local Wi-Fi hubs
27 communication interface. Any host board that supports the Arduino connector can be used with
31 -------------
33 the nRF70 driver requires firmware binary blobs for Wi-Fi operation. Run the command
36 .. code-block:: console
44 The shield can be used in any application by setting ``--shield nrf7002ek`` when invoking ``west bu…
46 SR Co-existence
49 The nRF7002 EK supports SR co-existence provided the host board supports it. The SR co-existence
50 pins are connected to the host board's GPIO pins. The interface is selected by setting
51 ``--shield nrf7002ek_coex`` when invoking ``west build``.
53 Two Kconfig options are available to enable SR co-existence:
55 - :kconfig:option:`CONFIG_NRF70_SR_COEX`: Enables SR co-existence driver.
56 - :kconfig:option:`CONFIG_NRF70_SR_COEX_RF_SWITCH`: Control SR side RF switch.
63 - ``nrf7002ek``: The default variant.
64 - ``nrf7002ek_nrf7001``: Variant for the nRF7001 SoC or nRF7002 SoC emulating nRF7001
65   that supports only 2.4GHz Wi-Fi.
66 - ``nrf7002ek_nrf7000``: Variant for the nRF7000 SoC or nRF7002 SoC emulating nRF7000
67   that supports only 2.4GHz Wi-Fi.
68 - ``nrf7002ek_coex``: Variant for the SR co-existence interface
73 - `nRF7002 EK product page <https://www.nordicsemi.com/Products/Development-hardware/nRF7002-EK>`_
74 - `nRF7002 product specification <https://infocenter.nordicsemi.com/index.jsp?topic=%2Fstruct_nrf70…
75 - `nRF7002 EK Co-existence <https://infocenter.nordicsemi.com/index.jsp?topic=%2Fps_nrf7002%2Fchapt…