Lines Matching +full:connector +full:- +full:control

10 Nordic and non-Nordic host boards.
12 The nRF7002 EK unlocks low-power Wi-Fi 6 capabilities for your host device. It support dual-band Wi…
14 Seamlessly connect to Wi-Fi networks and leverage Wi-Fi-based locationing, enabling advanced
15 features such as SSID sniffing of local Wi-Fi hubs
26 The nRF7002 EK board is designed to fit straight into an Arduino connector and uses SPI as the
27 communication interface. Any host board that supports the Arduino connector can be used with
31 -------------
33 the nRF70 driver requires firmware binary blobs for Wi-Fi operation. Run the command
36 .. code-block:: console
44 The shield can be used in any application by setting ``--shield nrf7002ek`` when invoking ``west bu…
46 SR Co-existence
49 The nRF7002 EK supports SR co-existence provided the host board supports it. The SR co-existence
51 ``--shield nrf7002ek_coex`` when invoking ``west build``.
53 Two Kconfig options are available to enable SR co-existence:
55 - :kconfig:option:`CONFIG_NRF70_SR_COEX`: Enables SR co-existence driver.
56 - :kconfig:option:`CONFIG_NRF70_SR_COEX_RF_SWITCH`: Control SR side RF switch.
63 - ``nrf7002ek``: The default variant.
64 - ``nrf7002ek_nrf7001``: Variant for the nRF7001 SoC or nRF7002 SoC emulating nRF7001
65   that supports only 2.4GHz Wi-Fi.
66 - ``nrf7002ek_nrf7000``: Variant for the nRF7000 SoC or nRF7002 SoC emulating nRF7000
67   that supports only 2.4GHz Wi-Fi.
68 - ``nrf7002ek_coex``: Variant for the SR co-existence interface
73 - `nRF7002 EK product page <https://www.nordicsemi.com/Products/Development-hardware/nRF7002-EK>`_
74 - `nRF7002 product specification <https://infocenter.nordicsemi.com/index.jsp?topic=%2Fstruct_nrf70…
75 - `nRF7002 EK Co-existence <https://infocenter.nordicsemi.com/index.jsp?topic=%2Fps_nrf7002%2Fchapt…