Lines Matching +full:extcomin +full:- +full:gpios
16 to a gpio. If devicetree contains ``disp-en-gpios`` then it will be set to
24 signal on the EXTCOMIN pin.
26 Currently the driver only supports VCOM toggling using the EXTCOMIN pin
28 When ``extcomin-gpios`` is defined, driver starts a thread which will
29 toggle EXTCOMIN at ``extcomin-frequency`` frequency. Higher frequency
33 define ``extcomin-gpios`` and implement their preferred method in
39 +---------------+---------------------------------------------------------+
43 +---------------+---------------------------------------------------------+
45 +---------------+---------------------------------------------------------+
47 +---------------+---------------------------------------------------------+
48 | EXTCOMIN | VCOM Inversion Polarity Input (VCOM can be controlled |
50 +---------------+---------------------------------------------------------+
53 +---------------+---------------------------------------------------------+
55 +---------------+---------------------------------------------------------+
74 +----------------------+------------------------------+
79 +----------------------+------------------------------+
91 Set ``--shield ls013b7dh03`` when you invoke ``west build``. For example:
93 .. zephyr-app-commands::
94 :zephyr-app: samples/subsys/display/lvgl
102 .. target-notes::
108 https://www.mouser.com/datasheet/2/365/LS013B7DH03%20SPEC_SMA-224806.pdf