Lines Matching +full:disp +full:- +full:en +full:- +full:gpios
13 The DISP pin controls whether to display memory
16 to a gpio. If devicetree contains ``disp-en-gpios`` then it will be set to
28 When ``extcomin-gpios`` is defined, driver starts a thread which will
29 toggle EXTCOMIN at ``extcomin-frequency`` frequency. Higher frequency
33 define ``extcomin-gpios`` and implement their preferred method in
39 +---------------+---------------------------------------------------------+
43 +---------------+---------------------------------------------------------+
45 +---------------+---------------------------------------------------------+
47 +---------------+---------------------------------------------------------+
50 +---------------+---------------------------------------------------------+
51 | DISP | Display ON/OFF switching signal (Can be connected |
53 +---------------+---------------------------------------------------------+
55 +---------------+---------------------------------------------------------+
74 +----------------------+------------------------------+
79 +----------------------+------------------------------+
91 Set ``--shield ls013b7dh03`` when you invoke ``west build``. For example:
93 .. zephyr-app-commands::
94 :zephyr-app: samples/subsys/display/lvgl
102 .. target-notes::
108 https://www.mouser.com/datasheet/2/365/LS013B7DH03%20SPEC_SMA-224806.pdf