Lines Matching +full:120 +full:- +full:pin
7 wireless connectivity (2.4G/5G dual-band Wi-Fi and BLE 5.0), LCD display,
8 USB C port, FPC connector, microSD card slot, Raspberry Pi compatible 40-pins
14 - ATSAMD51P19 ARM Cortex-M4F processor at 120 MHz
15 - 512 KiB flash memory and 192 KiB of RAM
16 - 4 MiB external flash
17 - MicroSD card slot
18 - RTL8720DN 2.4G/5G Dual Bands Wireless and BLE5.0 Combo Module
19 - 2.4inch LCD display
20 - LIS3DH accelerometer
21 - Microphone 1.0V-10V -42dB
22 - Speaker ≥78dB @10cm 4000Hz
23 - Light Sensor 400-1050nm
24 - Infrared Emitter 940nm
25 - GPIO 40 pin (Raspberry Pi compatible)
26 - 2x Grove connectors
27 - 1x user LED
28 - 3x user buttons
29 - 5-way user button
30 - Power/Reset/Boot mode switch
31 - Native USB port
38 .. list-table::
39 :header-rows: 1
41 * - Interface
42 - Controller
43 - Driver / Component
44 * - NVIC
45 - on-chip
46 - Nested vector interrupt controller
47 * - Flash
48 - on-chip
49 - Can be used with LittleFS to store files
50 * - SYSTICK
51 - on-chip
52 - Systick
53 * - WDT
54 - on-chip
55 - Watchdog
56 * - GPIO
57 - on-chip
58 - I/O ports
59 * - USART
60 - on-chip
61 - Serial port
62 * - I2C
63 - on-chip
64 - Inter-Integrated Circuit
65 * - SPI
66 - on-chip
67 - Serial Peripheral Interface port
68 * - TRNG
69 - on-chip
70 - True Random Number Generator
71 * - HWINFO
72 - on-chip
73 - Unique 128 bit serial number
74 * - RTC
75 - on-chip
76 - Real-Time Counter
77 * - USB
78 - on-chip
79 - USB device
80 * - PWM
81 - on-chip
82 - PWM
89 Zephyr can use the default Cortex-M SYSTICK timer or the SAM0 specific RTC.
104 on-chip PLL generating the 120 MHz system clock.
116 host PC. See the :zephyr:code-sample-category:`usb` sample applications for more, such as the
117 :zephyr:code-sample:`usb-cdc-acm` sample which sets up a virtual serial port that echos
136 .. zephyr-app-commands::
137 :zephyr-app: samples/basic/button
146 .. zephyr-app-commands::
147 :zephyr-app: samples/basic/button
158 In addition to the built-in bootloader, the Wio Terminal can be flashed and
159 debugged using an SWD probe such as the Segger J-Link.
168 :code:`GND`, and :code:`VTref` pins on the `J-Link`_.
172 .. zephyr-app-commands::
173 :zephyr-app: samples/basic/button
176 :flash-args: -r openocd
181 .. zephyr-app-commands::
182 :zephyr-app: samples/basic/button
190 .. target-notes::
193 https://wiki.seeedstudio.com/Wio-Terminal-Getting-Started/
196 https://wiki.seeedstudio.com/Wio-Terminal-Getting-Started/#pinout-diagram
199 https://wiki.seeedstudio.com/Wio-Terminal-Getting-Started/#resources
202 https://wiki.seeedstudio.com/Wio-Terminal-Getting-Started/#test-with-swd
204 .. _J-Link:
205 https://www.segger.com/products/debug-probes/j-link/technology/interface-description/