Lines Matching full:lora
6 LoRa-E5 mini is a compacted-sized development board suitable for the rapid
7 testing and building of small-sized LoRa device, exposing all capabilities of
8 Seeed Studio LoRa-E5 STM32WLE5JC module.
13 The boards' LoRa-E5 Module packages a STM32WLE5JC SOC, a 32MHz TCXO,
16 SX126X LoRa IP to support (G)FSK, BPSK, (G)MSK, and LoRa modulations.
18 - LoRa-E5 STM32WLE5JC Module with STM32WLE5JC multiprotocol LPWAN single-core
23 - RF transceiver (150 MHz to 960 MHz frequency range) supporting LoRa®,
43 - All GPIOs led out from the LoRa-E5 STM32WLE5JC module
46 More information about the board can be found at the `LoRa-E5 mini Wiki`_.
48 More information about LoRa-E5 STM32WLE5JC Module can be found here:
50 - `LoRa-E5 STM32WLE5JC Module Wiki`_
51 - `LoRa-E5 STM32WLE5JC Module datasheet`_
59 The Zephyr LoRa-E5 mini configuration supports the following hardware features:
84 | RADIO | on-chip | LoRa |
105 LoRa-E5 mini has 4 GPIO controllers. These controllers are responsible for pin
113 :alt: LoRa-E5 mini Pinout
128 LoRa-E5 mini board System Clock could be driven by the low-power internal (MSI),
154 The LoRa-E5 mini does not include a on-board debug probe.
169 Flashing an application to LoRa-E5 mini
172 Connect the LoRa-E5 to your host computer using the external debug probe.
207 https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/
210 https://files.seeedstudio.com/products/317990687/res/LoRa-E5%20module%20datasheet_V1.0.pdf