Lines Matching +full:power +full:- +full:amplifier +full:- +full:output

12 and a +20 dBm power amplifier.  Refer to `AcSIP S76S Product Information Brief`_ for details.
29 Programming and debugging uses the SWD port, as on any STM32 processor.  An ST-LINK/V2 adapter
30 may be used with the appropriate software (*st-utils* package on Linux).
33 Connector Pin-Out
36 The LoDev has two rows of headers.  Pin 1 on both connectors is closest to the micro-USB connector …
39 When viewed from the top (component) side of the board, with the micro-USB connector closest and RF…
42 UART1 on the S76S SiP is connected to a USB-to-UART device connected to the micro USB connector, so…
55 -----------
56 CN6 Pin-Out
57 -----------
62 1   3.3V     Output 500 mA max
80 19  PA10     USB serial Rx is driven by this pin (output) for UART1
86 -----------
87 CN7 Pin-Out
88 -----------
117 --------------------------
119 --------------------------
124 PA15     I/O      FT            -    INTERNAL SX1276 D5
125 PB3      I/O      FTf           -    INTERNAL SX1276 D4
126 PB4      I/O      FTf           -    INTERNAL SX1276 D3
127 PB9      I/O      FTf           -    INTERNAL SX1276 D2
128 PB10     I/O      FT            -    INTERNAL SX1276 Reset
129 PB11     I/O      FT            -    INTERNAL SX1276 D0
130 PB12     I/O      FT            -    INTERNAL SX1276 SPI nCS
131 PB13     I/O      FTf           -    INTERNAL SX1276 SPI2_SCK
132 PB14     I/O      FTf           -    INTERNAL SX1276 SPI2_MISO
133 PB15     I/O      FT            -    INTERNAL SX1276 SPI2_MOSI
134 PC13     I/O      FT            -    INTERNAL SX1276 D1
143 .. _LoDev: https://ronoth.com/products/lodev-s76s-lora-soc-development-board?variant=31608819417220
147 .. _AcSIP S76S: http://www.acsip.com.tw/index.php?action=products-detail&fid1=11&fid2=29&fid3=27&id…
159 .. _Semtech SX1276: https://www.semtech.com/products/wireless-rf/lora-transceivers/sx1276
167 SPDX-License-Identifier: Apache-2.0