Lines Matching +full:connector +full:- +full:control
9 The Renesas RA6M5 group uses the high-performance Arm® Cortex®-M33 core with
14 The key features of the EK-RA6M5 board are categorized in three groups as follow:
18 - 200MHz Arm Cortex-M33 based RA6M5 MCU in 176 pins, LQFP package
19 - Native pin access through 4 x 40-pin male headers
20 - MCU current measurement points for precision current consumption measurement
21 - Multiple clock sources - RA6M5 MCU oscillator and sub-clock oscillator crystals,
25 **System Control and Ecosystem Access**
27 - USB Full Speed Host and Device (micro-AB connector)
28 - Four 5V input sources
30 - USB (Debug, Full Speed, High Speed)
31 - External power supply (using surface mount clamp test points and power input vias)
33 - Three Debug modes
35 - Debug on-board (SWD)
36 - Debug in (ETM, SWD and JTAG)
37 - Debug out (SWD)
39 - User LEDs and buttons
41 - Three User LEDs (red, blue, green)
42 - Power LED (white) indicating availability of regulated power
43 - Debug LED (yellow) indicating the debug connection
44 - Two User buttons
45 - One Reset button
47 - Five most popular ecosystems expansions
49 - Two Seeed Grove system (I2C/Analog) connectors
50 - One SparkFun Qwiic connector
51 - Two Digilent Pmod (SPI and UART) connectors
52 - Arduino (Uno R3) connector
53 - MikroElektronika mikroBUS connector
55 - MCU boot configuration jumper
59 - Ethernet (RJ45 RMII interface)
60 - USB High Speed Host and Device (micro-AB connector)
61 - 32 Mb (256 Mb) External Quad-SPI Flash
62 - 64 Mb (512 Mb) External Octo-SPI Flash
63 - CAN (3-pin header)
69 EK-RA6M5 Board Functional Area Definitions (Credit: Renesas Electronics Corporation)
82 Detailed hardware feature for the EK-RA6M5 MCU can be found at `EK-RA6M5 - User's Manual`_
87 The below features are currently supported on Zephyr OS for EK-RA6M5 board:
89 +-----------+------------+----------------------+
92 | GPIO | on-chip | gpio |
93 +-----------+------------+----------------------+
94 | MPU | on-chip | arch/arm |
95 +-----------+------------+----------------------+
96 | NVIC | on-chip | arch/arm |
97 +-----------+------------+----------------------+
98 | UART | on-chip | serial |
99 +-----------+------------+----------------------+
100 | CLOCK | on-chip | clock control |
101 +-----------+------------+----------------------+
102 | I2C | on-chip | i2c |
103 +-----------+------------+----------------------+
104 | SPI | on-chip | spi |
105 +-----------+------------+----------------------+
106 | COUNTER | on-chip | counter |
107 +-----------+------------+----------------------+
108 | USBHS | on-chip | udc |
109 +-----------+------------+----------------------+
110 | ADC | on-chip | adc |
111 +-----------+------------+----------------------+
112 | PWM | on-chip | pwm |
113 +-----------+------------+----------------------+
128 Program can be flashed to EK-RA6M5 via the on-board SEGGER J-Link debugger.
129 SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
133 1. Connect to J-Link OB via USB port to host PC
135 …2. Make sure J-Link OB jumper is in default configuration as describe in `EK-RA6M5 - User's Manual…
139 .. code-block:: console
141 west flash -r jlink
162 - `EK-RA6M5 Website`_
163 - `RA6M5 MCU group Website`_
165 .. _EK-RA6M5 Website:
166 …enesas.com/us/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra6m5-evaluation-ki…
169 …ducts/microcontrollers-microprocessors/ra-cortex-m-mcus/ra6m5-200mhz-arm-cortex-m33-trustzone-high…
171 .. _EK-RA6M5 - User's Manual:
172 https://www.renesas.com/us/en/document/man/ek-ra6m5-v1-users-manual
175 https://www.renesas.com/us/en/document/man/ra6m5-group-users-manual-hardware