Lines Matching +full:120 +full:- +full:pin
10 series for applications that require a high-performance Arm® Cortex®-M4 core at
17 The key features of the EK-RA6M1 board are categorized in three groups as follow:
19 **MCU Native Pin Access**
20 - R7FA6M1AD3CFP
21 - 100-pin LQFP package
22 - 120 MHz Arm® Cortex®-M4 core with Floating Point Unit (FPU)
23 - 256 KB SRAM
24 - 512 KB code flash memory
25 - 8 KB data flash memory
28 - A Device USB connector for the Main MCU
29 - S124 MCU-based SEGGER J-Link® On-Board interface for debugging and programming of the
30 RA6M1 MCU. A 10-pin JTAG/SWD interface is also provided for connecting optional external
32 - Two PMOD connectors, allowing use of appropriate PMOD compliant peripheral plug-in modules for
34 - Pin headers for access to power and signals for the Main MCU
37 - Main MCU oscillator crystals, providing precision 12.000 MHz and 32,768 Hz external reference
39 - Additional low-precision clocks are available internal to the Main MCU
42 - One jumper to allow measuring of Main MCU current
43 - Copper jumpers on PCB bottom side for configuration and access to selected MCU signals
45 - External 5 V input through the Debug USB connector supplies the on-board power regulator to power
48 - A two-color board status LED indicating availability of regulated power and connection status of …
50 - A red User LED, controlled by the Main MCU firmware
51 - A User Push-Button switch, User Capacitive Touch Button sensor, and an optional User Potentiomete…
53 - MCU reset push-button switch
54 - MCU boot configuration jumper
58 - USB Full Speed Debug and Device (micro-AB connector)
64 EK-RA6M1 Board Functional Area Definitions (Credit: Renesas Electronics Corporation)
77 Detailed hardware feature for the EK-RA6M1 MCU can be found at `EK-RA6M1 - User's Manual`_
82 The below features are currently supported on Zephyr OS for EK-RA6M1 board:
84 +-----------+------------+----------------------+
87 | GPIO | on-chip | gpio |
88 +-----------+------------+----------------------+
89 | MPU | on-chip | arch/arm |
90 +-----------+------------+----------------------+
91 | NVIC | on-chip | arch/arm |
92 +-----------+------------+----------------------+
93 | UART | on-chip | serial |
94 +-----------+------------+----------------------+
95 | CLOCK | on-chip | clock control |
96 +-----------+------------+----------------------+
97 | I2C | on-chip | i2c |
98 +-----------+------------+----------------------+
99 | SPI | on-chip | spi |
100 +-----------+------------+----------------------+
101 | COUNTER | on-chip | counter |
102 +-----------+------------+----------------------+
103 | ADC | on-chip | adc |
104 +-----------+------------+----------------------+
105 | PWM | on-chip | pwm |
106 +-----------+------------+----------------------+
121 Program can be flashed to EK-RA6M1 via the on-board SEGGER J-Link debugger.
122 SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
126 1. Connect to J-Link OB via USB port to host PC
128 …2. Make sure J-Link OB jumper is in default configuration as describe in `EK-RA6M1 - User's Manual…
132 .. code-block:: console
134 west flash -r jlink
155 - `EK-RA6M1 Website`_
156 - `RA6M1 MCU group Website`_
158 .. _EK-RA6M1 Website:
159 …enesas.com/us/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra6m1-evaluation-ki…
162 …en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ra6m1-32-bit-microcontrollers-120mhz…
164 .. _EK-RA6M1 - User's Manual:
165 https://www.renesas.com/us/en/document/mat/ek-ra6m1-v1-users-manual
168 https://www.renesas.com/us/en/document/mah/renesas-ra6m1-group-users-manual-hardware?r=1054156