Lines Matching +full:location +full:- +full:swo
15 - CPU: 64 MHz Cortex-M4 with FPU
16 - RAM: 64KB SRAM
17 - Flash: 512KB on board flash with additional 4MB SPI NOR XT25F32B
18 - Display: 1.3 inches (33mm), 240x240 pixels display with ST7789 driver
19 - Touchscreen: CST816S Capacitive Touch
20 - Battery: 170-180mAh 3.8V LiPo
21 - BMA421 Triaxial Acceleration Sensor
22 - HRS3300 PPG Heart Rate Sensor
23 - Vibration motor
31 +----------------------+---------------------------------+-----------+
35 +----------------------+---------------------------------+-----------+
37 +----------------------+---------------------------------+-----------+
38 | P0.02/AIN0 | SPI-SCK, LCD_SCK | OUT |
39 +----------------------+---------------------------------+-----------+
40 | P0.03/AIN1 | SPI-MOSI, LCD_SDI | OUT |
41 +----------------------+---------------------------------+-----------+
42 | P0.04/AIN2 | SPI-MISO | IN |
43 +----------------------+---------------------------------+-----------+
44 | P0.05/AIN3 | SPI-CE# (SPI-NOR) | OUT |
45 +----------------------+---------------------------------+-----------+
46 | P0.06 | BMA421-SDA, HRS3300-SDA, TP-SDA | I/O |
47 +----------------------+---------------------------------+-----------+
48 | P0.07 | BMA421-SCL, HRS3300-SCL, TP-SCL | OUT |
49 +----------------------+---------------------------------+-----------+
50 | P0.08 | BMA421-INT | IN |
51 +----------------------+---------------------------------+-----------+
53 +----------------------+---------------------------------+-----------+
55 +----------------------+---------------------------------+-----------+
57 +----------------------+---------------------------------+-----------+
59 +----------------------+---------------------------------+-----------+
61 +----------------------+---------------------------------+-----------+
63 +----------------------+---------------------------------+-----------+
65 +----------------------+---------------------------------+-----------+
67 +----------------------+---------------------------------+-----------+
69 +----------------------+---------------------------------+-----------+
70 | P0.18/TRACEDATA0/SWO | LCD_RS OUT | |
71 +----------------------+---------------------------------+-----------+
73 +----------------------+---------------------------------+-----------+
75 +----------------------+---------------------------------+-----------+
77 +----------------------+---------------------------------+-----------+
79 +----------------------+---------------------------------+-----------+
81 +----------------------+---------------------------------+-----------+
83 +----------------------+---------------------------------+-----------+
85 +----------------------+---------------------------------+-----------+
87 +----------------------+---------------------------------+-----------+
89 +----------------------+---------------------------------+-----------+
91 +----------------------+---------------------------------+-----------+
93 +----------------------+---------------------------------+-----------+
94 | P0.30/AIN6 | HRS3300-TEST | IN |
95 +----------------------+---------------------------------+-----------+
97 +----------------------+---------------------------------+-----------+
105 .. zephyr-app-commands::
106 :zephyr-app: samples/basic/button
121 - Unlock the device
122 - Upload new software
123 - Run a debugger
139 :alt: PineTime SWD location
144 Unlocking the device is a one-time action that is needed to enable to debug
150 .. code-block:: console
152 $ nrfjprog -f NRF52 --recover
159 .. code-block:: console
161 $ nrfjprog -f NRF52 --program firmware.hex --sectorerase
170 This setup can be done using the menu Tools/J-Link Settings. or by directly
173 .. code-block:: console
184 .. target-notes::
196 http://files.pine64.org/doc/PineTime/PineTime%20Schematic-V1.0a-20191103.pdf