Lines Matching +full:gpio +full:- +full:power +full:- +full:switches
6 The Particle Argon is a Wi-Fi enabled development board with a Nordic
7 Semiconductor nRF52840 for mesh support and an ESP32 for Wi-Fi. The
15 |reg| Cortex |reg|-M4F SoC with an integrated 2.4 GHz transceiver supporting
20 - `Argon Datasheet`_
21 - `Argon Hardware Files`_
26 On the front of the board are RGB-LED, LED and LIPO circuitry.
27 The RGB-LED is controlled by the nRF52840 via GPIO pins.
29 Power supply
32 The board is optimized for low power applications and supports two
33 power source configurations: battery and micro USB connector.
43 +-----------+------------+----------------------+
46 | NVIC | on-chip | nested vectored |
48 +-----------+------------+----------------------+
49 | RTC | on-chip | system clock |
50 +-----------+------------+----------------------+
51 | UART | on-chip | serial port |
52 +-----------+------------+----------------------+
53 | I2C | on-chip | i2c |
54 +-----------+------------+----------------------+
55 | SPI | on-chip | spi |
56 +-----------+------------+----------------------+
57 | GPIO | on-chip | gpio |
58 +-----------+------------+----------------------+
59 | FLASH | on-chip | flash |
60 +-----------+------------+----------------------+
61 | RADIO | on-chip | Bluetooth |
62 +-----------+------------+----------------------+
70 common to all Feather-compatible Particle boards. Some peripherals are
73 - ``mesh_feather_i2c1_twi1.dtsi`` exposes TWI1 on labeled Feather
75 - ``mesh_feather_spi_spi1.dtsi`` exposes SPI1 on labeled Feather
77 - ``mesh_feather_spi_spi3.dtsi`` exposes SPI3 on labeled Feather
79 - ``mesh_feather_spi1_spi3.dtsi`` exposes SPI3 on labeled Feather
81 - ``mesh_feather_uart1_rtscts.dtsi`` adds hardware flow control to
85 ---
93 ------------
99 ---
105 ---
113 ----
130 .. zephyr-app-commands::
131 :zephyr-app: samples/basic/blinky
139 :zephyr:code-sample:`hello_world` application.
141 .. zephyr-app-commands::
142 :zephyr-app: samples/hello_world
144 :maybe-skip-config:
151 There are 2 samples that allow you to test that the buttons (switches) and
154 * :zephyr:code-sample:`blinky`
155 * :zephyr:code-sample:`button`
161 https://docs.particle.io/datasheets/wi-fi/argon-datasheet/
164 https://github.com/particle-iot/argon