Lines Matching refs:need
292 To use this board, you will need:
314 Before programming and debugging, you first need to get a GNU
373 - If you put the toolchain somewhere else, you will need to change
375 - If you put OpenOCD somewhere else, you will need to change the
412 Next, you'll need to make sure your board boots the RI5CY or ZERO-RISCY core.
413 **You only need to do this once.**
423 Linux users: to run these commands as a normal user, you will need
517 You need to make sure this happens every time you use this board.
525 Due to a toolchain `linker issue`_, you need to add an option setting
567 Linux users: to run these commands as a normal user, you will need
575 Since you need to use a special OpenOCD, the easiest way to flash is
612 Linux users: to run these commands as a normal user, you will need
690 Ubuntu 18.04 users need to install these additional dependencies::
697 Users of other Linux distributions need to install the above packages
700 macOS users need to install dependencies with Homebrew::
716 applications. If you set it to something else, you will need to update